Whites

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.
  
  

Put the spark back in your ride with a Whites Electrical Coil. Manufactured as a direct OEM replacement while meeting or exceeding OEM specifications, it will mount with ease and outperform that worn out coil. Whites Ignition Coil's are the perfect cost-effective alternative to OEM ignition coils, with a vast range of applications available.

Features:

• Cost-effective OEM alternative.
• OEM replacement.
• Manufactured to meet or exceed OEM specifications.
• Diverse applications.
• Voltage: 12V
• Primary (ohm): 1.46 ohm
• Secondary (ohm): 10.67k ohm
• Holes Centres: 80mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Whites OEM replacement cast brake perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped, compatible with your OEM lever and Whites replacement levers.

With a polished silver finish, and a hot start lever to ensure your bike starts perfectly throughout the day. The included rubber covers keep excess dust out, maintaining a smooth and flawless operation. Mounting hardware is included for a hassle-free and quick fix to your brake/clutch system.

Specifications:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Made from die-cast aluminium for maximum durability and affordability.
• Fits OEM levers and Whites replacement levers.
• Mounting hardware included.

Whites Cable range is designed to meet and exceed OEM specifications and quality at affordable pricing. Including Throttle, Clutch, Brake (front, rear and hand) and Speedo cable for various motorcycle applications.

Using a black vinyl housing and inner nylon sleeve for longer life and smooth operation the Whites Clutch Cables are designed to be a long life replacement for your worn and degraded OEM cable. We have a comprehensive range of Speedo Cables for your agricultural, off-road or road motorcycle.

Meets and exceed OEM quality cables
Black vinyl housing for cable protection
Inner nylon sleeve provides smooth operation and a long life
Designed to withstand the harsh life of a motorcycle
Provides consistently accurate speedo reading

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

NB: Please confirm suitability for your year, make, model prior to purchase.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

Quality ignition switch for Honda CT11O.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Whites Kill Switches are high-quality OEM styled replacement kill switches. Including the bar mount and bolt, wire it up and you're ready to rip. The fully waterproof button and heavy duty covered wire prevents water entering and shorting the switch. OEM style, shape and plug ensures a quick and easy installation.

Features:

• OEM replacement.
• Quick and easy installation.
• Fully waterproof.
• OEM style, shape and plug.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Having the ability to turn corners is pretty important, so tie rod ends play a large role in any vehicle's safety. Whites Tie Rod End Kits are the perfect replacement for your old and worn-out OE parts, or an excellent upgrade to your steering system.

To ensure a great fit we recommend using our fitments search, or referencing the fitments tab above.

• Steel and aluminium construction strengthened in critical areas for durability
• Affordable OEM replacement
• Mounts to your OEM Tie Rods

The fuel pump relay is an integral part of your ATVs fuel system, the relay controls the amount of power that is transmitted to the fuel pump. If your fuel pump isn't operating you may need to replace the fuel pump relay. Fortunately, Whites have you covered once again with their fuel pump relay for most Honda TRX ATVs, built to meet and exceed OEM specifications and as an OEM replacement, the relay is easy to install and designed as a direct "bolt-on" replacement.

Features:

• Direct replacement to your original unit.
• Quality exceeds OEM specifications.
• Quick and easy installation.
• Suitable for a range of Honda TRX ATVs.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

The Whites Shock Seal Head Tool helps you to easily remove and install the shock seal head assembly. Designed to be simply pushed down without causing damage to the seal head when detaching the circlip of the shock body. Constructed with a knurled edge for additional grip preventing slips when detaching the circlip.

Helps you to easily remove and install the shock seal head assembly
Pushes down the seal head when detaching the circlip
Prevents damage to the shock body, circlip and seal head
Knurled edge for additional grip preventing slips
For use with 50mm WP shocks

Designed to be a good-quality OEM replacement for select Harley-Davidson models.

Use our Parts Finder or Fitment Guide to confirm suitability for your make, model, and year.

The Whites Switch Block is a complete full wrap-around switch block that includes a hi/lo headlight function, horn and indicator switch. The switch block comes pre-wired and with bullet ends for fast and hassle-free installation. The switch block is compatible with 7/8" handlebars and is perfect for restoring your old ride or replacing that broken and busted OEM switch block.

Features:

• Full wrap-around design.
• Pre-wired with bullet plugs.
• Compatible with 7/8" handlebars.

Includes:

• Hi/Lo headlight switch
• Indicator switch
• Horn

Designed to meet or exceed OEM specifications the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing. Premium high-speed bearings feature low drag, double lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Direct OEM replacement cast levers
Designed to exceed OEM specifications
Built to resist breakage
Designed to fit OEM master cylinder
Made from die-cast aluminum for maximum durability and affordability

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Built to outlast and outperform OEM seals, the Whites Oil & Dust Seals are a high-quality and cost-effective alternative to OEM replacement parts. Constructed with a dual-lip design that reduces friction and ensures better sealing, improving the life of the seal. Manufactured to strict factory specifications.

• High-quality OEM replacement
• Dual-lip design reduces friction and ensures better sealing
• Manufactured to factory specifications

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 45mm

Available in sizes 32mm-54mm.

Whites ATV Wheel Hubs are the ideal solution for tough use where reliability and strength are a must. Expertly made in compliance with stringent industry standards. Manufactured from exceptional materials using industry-leading equipment and processes.

Features:

• Made by experienced technicians using cutting-edge technology.
• Trusted for unbeatable quality and unsurpassed reliability.
• Made from top-grade materials to provide wear resistance.
• OEM replacement ensures a precise and reliable fit.