Whites

White's lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights, and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles, and mounting options Whites are here for your motorcycle lighting solutions.

Broken your old tail light assembly in a crash, or has it slowly deteriorated over time? Either way, Whites will get you back on the bike with this complete OEM replacement tail light assembly. Made with a high-quality acrylic lens and Polyethylene casing the Whites Tail Light Assembly will outperform and outlive your OEM assembly.

• OEM replacement
• Affordable price
• Constructed from durable acrylic
• Shatterproof
• Resistant to UV damage
• Casing Colour: Black
• Lens Colour: Red
• 2 bolt mounting

Dimensions

• Top Length: 40mm
• Bottom Length: 56mm
• Height: 106mm
• Width: 42mm

Mounting Dimensions:

• Bolt Diameter: 5.8mm
• Bolt Center to Center: 49mm

One of the easiest bolt-on upgrades you can make to your forks, allowing you to bleed the air pressure from your forks without tools. Bleeding the air reduces the harshness of your forks caused by pressure build up. Constructed with a durable stainless steel body and an anodised 6061 T6 aluminium top. Relieving excess pressure increases the life of your fork seals, saving on costly repairs.

Easy to install, simply replace the OE bleeder
Reduces harshness caused by air build-up
Allows bleeding of air pressure without tools
One of the easiest bolt-on upgrades you can make to your forks
Compact design
Two bleeder valves for both left and right fork are included
Stainless steel body is durable and resists corrosion
Size: M5 x 0.8
Colour: Black

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites A-Arm Kit is designed to replace worn-out rubber bushings while providing additional suspension travel and greater performance. Constructed to meet and exceed OEM specifications and designed as an OEM replacement. The rebuild kits contain all of the bearings, seals, shafts and other components to repair A-arm failure. Each kit is designed to repair one A-arm; two kits are required for a complete installation.

Features:

• OEM replacement kit.
• Improves performance.
• One kit required per A-arm.
• Contains components for complete A-arm rebuild.
• Meets and exceeds OEM specifications.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Whites OEM replacement cast clutch perch provides an economical alternative to original levers. The perfect replacement for when your perch has broken or thread stripped. In an OEM long lever design to improve feel and braking.

Features:

• Direct OEM replacement cast perch.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Includes perch.
• Made from die-cast aluminium for maximum durability and affordability.

If you've broken your mirrors, don't worry. We've got you covered with our range of OEM-style Whites Mirrors. An affordable solution when only one mirror needs replacing. Designed to meet or exceed OEM specifications, Whites Mirrors provide a high-quality, cost-effective alternative to your original mirrors. Available for most makes and models, we recommend using our fitment search to find the perfect mirror for your bike.

Features:

• OEM replacement part.
• OEM-styled.
• Competitive pricing.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Replace your old and worn ball joints with Whites range of Heavy-Duty Ball Joints, perfect as an upgrade to your OEM ball joints or replacement for worn joints. Constructed with a heavy-duty steel outer housing and a premium bearing cup, which keeps the ball end isolated from the outer housing, extending the life of the joint.

Features:

• Heavy-duty steel outer housing.
• Premium bearing cup.
• The ball end is isolated from the outer housing.
• Meets and exceeds OEM specifications.
• Extended life.

Note: Ball Joints are model-specific, it is recommended that you use our fitments search to ensure correct fit.

Motorcycles, ATV's and UTV's are used in some of the harshest environments, dust filled air, mud and rain are all ideal environments for mechanical failure. The fuel filter is the fuel systems defence against contamination, from dirt and dust or particles in pump gas, over time your fuel filter will clog as it filtrates your fuel restricing flow and causing your fuel pump to work under additional stress which can cause premature failure. Replacing your fuel filter is inexpensive preventative maintenance which improves fuel quality, fuel flow and increases the life of your fuel pump. It is recommended to replace the fuel filter every 6-12 months dependent on application and usage.

Increases fuel flow
Improves fuel quality in engine
Reduces stress on fuel pump
Inexpensive preventative maintenance
OEM replacement
Built to meet and exceed OEM specifications

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Replace old and worn out U joints with high-quality Whites ATV/UTV U joint assemblies. Cold forged from SCM-415 steel and case hardened, and pre-greased using hi-temp lithium grease. Included sealed bearing cups keep contamination out and the grease in improving the life of your U joints. While the centrally located grease zero and channels distributes grease evenly when injecting additional grease during maintenance.

Cold forged from SCM-415 steel
Case hardened for additional strength and durability
Pre-greased using hi-temp lithium grease
Bearing cups included preventing contamination
Centrally located grease zero

Diameter: 24mm
Width: 40.25mm
Type: Inner Snap Ring

Kit Includes:
1x ATV/UTV U-Joint
1x 90-degree nipple
1x 45-degree nipple
4x Circlips
4x Sealed bearing cups

Whites Oil Filters are designed to trap harmful contaminants while still allowing a high oil flow rate.

Features:

• Designed for great filtration.
• Oil filter design provides for a high rate of oil flow.
• Filters available for almost all makes and models.

The Whites Fuel Tap is designed as a direct bolt-on OEM replacement petcock for your motorcycle or ATV. The fuel tap includes all seals for quick and easy installation and is built to meet or exceed OEM specifications, with an OEM design for the perfect fit.

Features:

• OEM replacement.
• Includes seals (gasket/o-ring).
• Exceeds OEM specifications.

Don't lose your spark. Whites Sparks Plug Caps offer exceptional connection between high-tension leads and the spark plug. They are designed to reduce noise across all frequencies, ensuring engine performance isn't affected.

Features:

• Sufficient resistor length prevents internal flashover and maintains consistent resistance.
• Made with high-quality ceramic materials, resisting deterioration and offering minimal resistance variation under heavy loads.
• Plug connector constructed from tough phenolic resin, providing excellent heat resistance and withstanding high tension.
• Durable rubber material.
• Heat press insertion further strengthens the cap, making it highly resistant to vibration.
• Special rubber seals prevent moisture-caused electrical leakage.

Specifications:

• Pl ug Φ: 14mm
• For terminal type: Terminal
• Colour: Black
• Resistor: 5 kiloohms

Replace your old and worn ball joints with Whites range of Heavy-Duty Ball Joints, perfect as an upgrade to your OEM ball joints or replacement for worn joints. Constructed with a heavy-duty steel outer housing and a premium bearing cup, which keeps the ball end isolated from the outer housing, extending the life of the joint.

Features:

• Heavy-duty steel outer housing.
• Premium bearing cup.
• The ball end is isolated from the outer housing.
• Meets and exceeds OEM specifications.
• Extended life.

Note: Ball Joints are model-specific, it is recommended that you use our fitments search to ensure correct fit.

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Curved mount matches tyre to prevent denting into the tyre and damaging your tube, tyre and rim
Prevents premature damage to your fork springs and seals from continuous compression
Stabilises bike and prevents tie downs popping off when on bumpy roads
Raised top reduces surface contact preventing damage to front mudguard
Crossbar holds seal saver in place when loading your ride
Plastic construction is lightweight and durable for easy transportation and extended life

Dimensions (mm): 293 x 231 x 98
Colour: Blue

TIE DOWN EXTENSIONS / LOOPS BLK

• Load Rating 1200lbs (544kgs)
• 500mm x 25mm

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Pin for the Whites Headstock Stand.

Whites extensive range of ATV shocks are perfect for servicing your four- wheeled machine, ATVs work and play in the harshest environments and if your OEM shock is broken, bent or just worn out Whites range of ATV shocks to suit Honda, Suzuki and Yamaha are perfect for you. Sold in pairs and available for both the front and rear of most common ATVs. Manufactured with a steel construction for exceptional strength and durability your new shock will last the distance, while the upgraded damping provides a comfortable ride.

Fits 2014-2017 Honda TRX420FM - Front
Steel construction shock body
Upgraded damping provides an extra comfortable ride
Sold as a pair

Dimensions:

• Top Eyelet ID: 10mm
• Top Eyelet Width: 20mm
• Bottom Eyelet ID: 10mm
• Bottom Eyelet Width: 24mm
• Height (Eyelet to Eyelet): 400mm

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD011R FOR PAIR SEE WPRAD011P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers
• Designed to exceed OEM specifications
• Built to resist breakage
• Designed to fit OEM perch
• Made from die-cast aluminum for maximum durability and affordability

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB005
  • Outer: WPAXCVB002
• Please confirm suitability for your year, make, and model prior to purchase.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

If you're restoring that classic ride to its former glory or manufacturing a custom masterpiece, Whites Rear Shocks are perfect for the job.

Available in a range of different chrome plating and black powder-coating combinations (depending on fitment model), we have the right shock for the job. The progressive rate spring provides bottoming resistance with improved damping for an extra comfortable ride.

Features:

• Steel construction shock body.
• Multi-stage velocity-sensitive hydraulic dampers.
• Progressive rate spring provides bottoming resistance.
• Upgraded damping provides an extra comfortable ride.
• Shocks are measured fully extended from eyelet to eyelet on centres.
• Multi-position adjustable.
• Kit is supplied with three bushing sizes to ensure the best fit.
• Sold as a pair.

Specifications:

• Spring Colour: Chrome Plating
• Absorber/Body Colour: Black Powdercoat
• Cap Colour: Black Powdercoat
• Top Mount: Bushing (comes installed), ID: 12mm
• Bottom Mount: Bushing (comes installed), ID: 10mm
• Eyelet centre to eyelet centre length: 365mm
• Total Length: 395mm
• Width: 55mm

Note: We have been stocking these aftermarket shocks without issue for many years. However, they are supplied without warranty, as the final use and application are beyond our control and they may exceed the products' design limits..