All Products

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

All Balls Fork Bushing Kits

All balls now offer a complete fork bush kit solution. The kit includes the below products:
- 2x slider bushings
- 2x leg bushings
- All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Dimensions :

• Interior diameter: 53mm
• Exterior diameter: 115mm
• Thickness: 20mm
• Length of wires stator to grommet: 100mm
• Length of wires grommet to plug: 130mm
• Length of pickup coil's wire to grommet: 45mm

Other specifications :

• Number of wires: 5
• Number of plugs: 2
• Number of pins: 5

Wire to wire resistance :

• Alternator : Black between each Black = 0.4 ohms +/-20%
• Pickup : Blue to Green = 220 ohms +/-20%

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and have over 25 years of experience in the high-performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods and customer service.

Features:

• In-house designed and manufactured; all forgings are produced in Wossner's company-owned forging operation.
• 4-stroke pistons are made using a double-bridged forging design.
• Lightweight pistons with the tightest piston-wall clearances in the industry give you a quieter running engine.
• Wossner pistons are used by leading Supercross, Arenacross and MX GP teams.
• Made in Germany.

Specifications:

• Pi ston Size: 80.96MM
• Piston B

NOTE: Wossner Piston Kits include the Piston, Wrist Pin, Circlips & Rings, Needle Bearings are not included.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Bolt brand bolts, nuts and washers meet all OEM standards. Designed with precision, each bolt comes in a convenient pack of 10.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Inner clutch cover gasket
• Designed to fit O.E.M. cover

NOTE: This Vertex Oil Seal Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include all oil seals necessary to rebuild the engine and transmission including crankshaft, output shaft, water pump, clutch, and shifter seals.

Putoline Oil is a Dutch manufacturer and supplier of high-quality oils and lubricants developed specifically for motorcycles scooters and quads making Putoline unique. Almost 50 years of experience and continual research allows Putoline to provide cutting edge products. Manufacturing their own products guarantees consistently high-quality motorcycle oils. Putoline Oil Driven by Technology!

RS 959 is a fully synthetic engine oil with revolutionary Ester Tech additive. The product guarantees exceptional film strength and pressure absorption even under the most extreme race conditions. RS 959 is particularly suitable for premix or injection 2-stroke engines which operate in extremely severe race conditions.

Recommended mix ratio: 2-4%.

Specifications:

• API TC
• JASO FD
• ISO-L-EGD
• Piaggio Hexagon

Properties:

• Density 15°C: 0.871kg/L
• Viscosity 40°C: 44mm²/s
• Viscosity 100°C: 8.8mm²/s
• Viscosity Index: 167
• Flash Point: 78°C
• Pour Point: -36°C
• Total Base Number: 6.6mgKOH/g

Kit includes water pump cover gasket or o-ring, water pump shaft bearing(s) and seal(s) to repair a leaking water pump seal and/or a failed bearing.

Features:

• Precision micro bearings provide OE quality and durability.
• High pressure/temperature mechanical and rubber seals.

The Hornet Wave keeps you out there at your best. Designed for performance.

Using Lightweight induction hardened stainless steel the Hornet Wave discs offer superior strength and durability while using MTX’s innovative technology to keep you in control under high-stress braking. Constructed using one complete segment of SUS 420 stainless steel, then heat-treated to HRC 36+-2. MTX’s Wave technology ensures your discs stay cool through high-strain environments.

All MTX discs are designed and manufactured with world-leading, cutting-edge technologies:

• Precision CNC machined and laser-cut technology
• Japanese SUS 420 Stainless Steel
• Replacement for Original Equipment
• High Tech Wave perforated design
• Optimum heat dissipation

Specifications:

• O.D: 270mm
• I.D: 118mm
• Minimum Thickness: 2.5mm
• Rotor Position: Front

Note:

Does NOT fit Yamaha WR450F speedo drives.

Ideal replacement for dirt bikes.

Features:

• Anti-swell alloy impregnated heavy-duty cork-based facings.
• Smooth clutch take up compared to paper clutches, which can ‘snatch’.
• Steel separator plates increase flywheel effect of the engine and improve performance.

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Dimensions:

• Width: 25 mm
• Length: 56 mm
• Height: 35 mm
• Sensor Size: 14x15x25 mm
• Hole Diameter: 7 mm

Other specifications:

• Number of plugs: 1
• Number of terminals: 3

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

DENALI Universal Crashbar / Engine Guard Mount

This DENALI Bar Camp Light Mount Kit allows fitment of any DENALI LED Lights to engine guards, crash bars, or any tube 21mm-29mm (0.826in-1.125in) in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

These clamps are intended for mounting lights to OEM or aftermarket crash bars, handlebars and frame tubes commonly found on adventure bikes, dual sport bikes, ATVs and snowmobiles. The clamps allow the lights to be positioned to the inside of the bars, ensuring they will be protected in a tip over.

Features

• Adjustable grip range (21mm-29mm) (0.826in-1.125in)
• Rotatable mounting shelf allows 4th axis of adjustability
• Lights can be mounted to shelf or directly to clamp
• Accepts M8 bolt from light pod
• Billet aluminum with black anodized finish
• Fits all standard SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech, and BMW original crashbars
• Sold as pair

What's In The Box?

• (x2) Mounting clamps
• (x2) Rotatable mounting shelves
• (x1) Hardware Kit

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filte r Material: Cotton Gauze
• Washable: Yes
• Height: 0.875in (22mm)
• Outside Length: 7.625in (194mm)
• Outside Width: 5.25in (133mm)
• Filter Re-Oiling Amount: 0.45oz (13ml)

The unique design of the MagniMate deluxe stand support means you can park your motorcycle on soft ground, safe in the knowledge that the wide base, with integrated magnet and rugged grips, will support it securely.

Features:

• Magnet located inside.
• Stay safe on soft ground.
• 10 grippers on base.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride.

Specifications:

• Air Filter Material: Cotton Gauze
• Air Filter Shape: Rectangular
• Filter Re-Oiling Amount: 0.79 oz (23 ml)
• Flanges: None
• Frame Design: Flexible
• Height: 3.063 in (78 mm)
• Item Type: High Performance
• Length: 8.25 in (210 mm)
• Oil Included: Yes
• Package Contents: 1 Air Filter
• Package Material: Paperboard
• Package Quantity: 1
• Package Type: Box
• Pre-Screened: No
• Product Box Height: 8.31 in (211 mm)

Product Box Length: 8.38 in (213 mm)

Product Box Width: 3.5 in (89 mm)

Product Style: Unique Air Filters

Product Weight: 1.15 lb (0.52 kg)

Washable: Yes

Weight: 1.1 lb

Warranty: No-Hassle Lifetime Limited

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle. K&N drop-in Replacement Filter: s are designed to install easily into your factory airbox. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Features:

• Designed to increase horsepower.
• Washable, reusable, and engineered to last for the life of your vehicle.
• Designed to provide high airflow and exceptional filtration.
• Engineered to fit easily into your factory airbox.
• Only needs cleaning every 50,000 miles under normal highway driving conditions.

Specifications:

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 1.438in (37mm)
• Outside Length: 7.938in (202mm)
• Outside Width: 5.938in (151mm)
• Filter Re-Oiling Amount: 1.01oz (30ml)