ELECTRICAL

The Foghorn is a 12v black motorcycle horn. It has a loud 105db horn and has a low tone electromagnetic 400 mhZ.

Features:

• Waterproof and corrosion proof construction.
• Universal mounting bracket, will fit most motorcycles and scooters.

Replace your indicators with this bespoke design.

Features:

• Matte black finish case.
• 15 LED bulb.
• Highly waterproof.
• E-marked (fully road legal).
• Pair of indicators + a pair of resistors included.
• Size: 74mm(L) x 29mm(W) x 18mm(H)

DENALI D2 Auxiliary LED Light Kit for Motorcycles, ATVs, UTVs, Snowmobiles, Jeeps and Trucks

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don’t be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.

DENALI’s innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

Features

• Comprehensive 9 piece LED light kit specifically designed for powersports applications
• High-Intensity Series Cree LEDs outputting 2190 lumens per kit
• TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one kit
• DataDim™ equipped light pods and harness allow plug-n-play connection to the DataDim™ dimming controller
• Premium powersports harness with waterproof switch and handlebar switch mount included
• DrySeal™ Submersible Waterproof light and switch housings can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Specs

• LED’s: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep (each)
• Pod Weight: 0.6 lbs (each)
• IP67 Waterproof & Submersible

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

It looks like a tiny side repeater, but it is actually the world's first CE-approved micro-indicator, which fits flush to the bike like a side repeater.

The Oxford Darkeye indicators are designed for ultra-low profile, flush-fit mounting. The dark smoked lenses and compact design offer an unrivalled aesthetic in a fully waterproof, super bright and E marked unit.

Features:

• Replacement flush-fit LED micro indicators.
• Dark smoked lens with 3 LEDs.
• Waterproof design.
• Voltage 12V
• Power 2.6W each
• M8 Bolt - thread pitch 1.25
• ABS construction.
• E-marked for road use.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Brand new external ignition coil.

Features:

• Direct replacement of your original unit.
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials.
• Spark plug cap(s) included.
• All products shipped are tested.

Specifications:

• Width: 34 mm
• Length: 45 mm
• Height: 70 mm
• Wires length: 450 mm / 210 mm
• Fixation holes centre to centre: 56 mm
• Primary Resistance: 5.0k ohms
• Secondary Resistance: 0.8 ohms

*The image shown is for illustrative purposes only. Actual product colour may vary. Depending on availability and model, the item may be supplied in blue or black. Product specifications and quality remain the same regardless of colour. If in doubt, do not hesitate to compare our item to your original part.

Brand new aftermarket voltage regulator rectifier.

Features:

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• No assembly required.
• Higher grade of electric components.
• The quality exceeds the OEM equipment.
• All products shipped are tested.

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Specifications:

Dimensions:

• Width: 41mm
• Length: 50mm
• Height: 27mm

Other specifications:

• Number of plugs: 1
• Number of pins: 4
• Minimum Charging Voltage: 14.5 V +/- 0.5 V
• Maximum Charging Current: 20 A / 150 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Brand new Starter Relay Solenoid Switch. The quality exceeds the OEM equipment.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications:

Dimensions

• Height: 51mm
• Length: 46mm
• Width: 33mm

Other specifications:

• Number of terminals: 4
• Number of plugs: 1

This vehicle-specific driving light mount allows you to mount any DENALI driving light to your R1300GS Adventure. Its low profile and tucked-in design make for a very clean install while placing your lights in the optimum location.

This kit includes beefy powder-coated steel brackets with an M8 mounting hole and all necessary mounting hardware.

What's In The Box

• (x2) Light Mounts
• Mounting Hardware

This rear-visibility bundle is the ultimate solution for making you more visible to other motorists in daytime or nighttime conditions. The bundle includes a pair of rear switchback T3 turn signals, a universal license plate mount, and a plug-and-play wiring harness for effortless connection to your bike via our CANsmart controller.

The T3 switchback signal pods have a red running light, super bright red brake light, but switch to a bright amber LED signal light in sync with your factory turn signals. All T3 functions are ECE compliant and are guaranteed to help you stand out!

This bundle is designed to connect to a CANsmart controller, which is sold separately.

Bundle Contents:

• (1x) T3 Modular Switchback Signal Pods - Rear
• (1x) License Plate Mount - For T3 Signal Pods
• (1x) CANsmart Wiring Harness for T3 Switchback Signals

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

Denali's Essential Lighting Bundle is a vehicle-specific driving light kit that was purpose-built to provide DENALI-level quality and performance at the most economical price point possible. The kit features a pair of our DL4 Driving Lights, our standard powersports harness, and a vehicle-specific upper light mount to position the lights in the ideal location and make installation a breeze.

The included single-intensity harness provides a simple on/off function via our waterproof push-button switch, but can easily be upgraded to dual intensity functionality by adding our modular DataDim Controller. If adding the dual intensity module, your lights will switch between half and full intensity with your vehicle's high beam switch.

Bundle Contents:

• (2x) DL4 Driving Light with DataDim Technology
• (1x) Driving Light Mount - Honda Africa Twin 1100 Adventure Sports ES, '20-'23
• (1x) Wiring Harness Kit for Driving Lights - Standard Powersports

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• The quality exceeds the OEM equipment
• All products shipped are tested

Specifications:

Dimensions:

Other specifications:

• Number of plugs: 2
• Number of wires: 2
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Note: Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR specialises in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Features:

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• Highest grade of lamination materials.
• All products shipped are tested.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

A Heavy Duty Flywheel to the rescue!

New RMSTATOR heavy-duty flywheel rotor for Yamaha Motorcycles is a well-priced solution to problems with the OEM flywheel, and an excellent alternative to all the mechanical troubles you can encounter with a repair.

• Built to OEM size: Fits precisely in your ride: install it and forget it.
• Improved epoxy: Uses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.
• High-grade steel capping: Prevents heat and friction from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
• Precise balancing: Eliminates crankshaft vibrations for longer engine longevity.
• Shop with confidence: Two years warranty. All products are tested.

Don't waste time with temporary solutions, and start fixing your ride like a pro!

Flywheel Dimensions:

• Exterior Diameter: 80 mm
• Interior Diameter: 69 mm
• Interior Diameter Center Housing: 12 mm
• Exterior Diameter Center Housing: 18 mm
• Thickness (exterior): 11 mm
• Thickness (interior): 6 mm

The diameter of the Shaft largest to the narrowest:

• 26 mm
• 20 mm
• 18 mm
• 15 mm

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Polaris uses the 3 and 4 position key switches in their vehicles so please be sure you need the 4 position unit

• 3 position switch has off, on, and spring return start
• 4 position switch has off, on, lights on, and spring return start

Replacement ignition key switch for your motorcycle/ATV. Direct replacement to the original unit this unit provides excellent plug-and-play, direct fit functionality providing simple, quick & easy installation. Two keys & all connectors are included.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Two keys included
• Connector included

Dimensions:

• Height : 61mm
• Length: 40mm
• Width: 40mm

Other Specification:

• Number of plugs: 1
• Number of terminals: 6
• Number of keys: 2
• Number of positions: 4 (Off/On/Accessories/Spring Return Start)

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.