HARD PARTS

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

PV SERIES – Semi-Sintered Pads

New high durability semi-sintered pads that have the brake response of an organic but the durability of a sintered pad. For sport bike use only.

OEM spacers typically wear out within a year of hard riding. The wheel spacers should be checked and replaced as needed with every bearing service. Water and dirt act as a grinding compound between the seal face and the mating surface of the spacer. Once the grooves are deep enough, the sealing surface is lost, allowing water and dirt to pass through and contaminate the bearing.

Wheel Spacer Kits are designed to restore the proper sealing surface between the wheel seal and spacer, helping protect wheel bearings from premature wear and failure. Manufactured to precise tolerances for a direct replacement fit, All Balls spacers provide a smooth, durable surface for the seal to run against, reducing the risk of contamination and extending bearing life. Ideal for routine maintenance or during wheel bearing replacement, a quality wheel spacer kit ensures reliable wheel performance in harsh riding conditions.

Motorcycles, especially higher-powered motorcycles, sometimes have trouble starting, especially in cold weather. The perfect solution for this is to replace the starter motor with a high-quality J&N Electrical motor for a quick start every time.

Features:

• Meets or exceeds OEM specification.
• 100% interchangeable, no modifications required.
• Durable double-sealed case for longer life.
• Vigorously tested and manufactured with insulated fittings.
• Provides higher torque than many OEM starter motors.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The MTX cable range is engineered to meet or exceed OEM cable specifications. The MTX cable range includes throttle, brake, clutch, and speedo cables suited to fit a wide range of motorcycles.

MTX cables are constructed with an inner nylon sleeve and a black vinyl housing to ensure long life while retaining smooth operation during use. MTX cables are designed to replace or upgrade OEM cables that are worn or degraded.

• Meets or exceeds OEM quality cables.
• Black vinyl housing for cable protection.
• Inner nylon sleeve provides smooth operation and a long life.

Holds the tyre securely onto the rimm

Features:

• Designed to withstand extreme pressure and friction.
• Fits 21" system.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Dimensions:

• Interior diameter: 53 mm
• Exterior diameter: 115 mm
• Thickness: 14 mm
• Length of wires stator to grommet: 50 mm
• Length of wires grommet to plug: 600 mm
• Length of pickup coil's wire to grommet: 150 mm

Other specifications:

• Number of wires: 5
• Number of plugs: 2
• Number of pins:5

Wire to wire resistance:

• Alternator: Green between each Green = 0.4 ohms +-20%
• Pickup: Black to White = 520 ohms +-20%

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

The Fat Boy Charger is fully automatic and suitable for charging 12-volt bike batteries with capacities between 4Ah and 100Ah. The charger also acts as a maintainer and you can 'connect and forget' as the charger will keep the battery voltage topped up. The Fat Boy is also suitable for charging lithium batteries. There is also protection against short circuits, reverse polarity and thermal overload. Comes with crocodile clips and eyelet connectors. This charger is also wall mountable.

Features:

• Charges 12V Batteries and lithium batteries of 2Ah - 20Ah.
• Charges batteries of 4Ah - 100Ah.
• Trickle charges STD, GEL, AGM batteries of all sizes.
• Can charge WET, GEL, AGM, and lithium batteries.
• Canbus Compatible
• Automatic Charging and maintaining
• Overcharge Protection
• Reverse Polarity Protection (Lead-Acid only)
• Short Circuit Protection (Lead-Acid only)
• Spark-proof (Lead-Acid only)

Specifications:

• Application: 12V AGM, Lead-Acid and Lithium
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 2A
• Max Charge Current: 2A
• Max Voltage: 14.9V (Lead-Acid), 14.6V (Lithium)
• Battery Capacity: 4-100Ah (Lead-Acid), 2-20Ah (Lithium)

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

The 2^nd generation HFP-396 is new and revised for 2017 to include pre-soldered connections, two flex hose lengths to cover all 2011-2017 applications, and most importantly now includes a 58psi regulator which Polaris implemented in 2013 to cure the well-known vapour lock problem.

The HFP-396 is the original replacement fuel pump for 2011-2017 Polaris ATVs and UTVs and is the only pump approved by the PRC Forum.  This pump will fully restore the specified 58psi+ fuel pressure as required by Polaris for all 2011+ EFI models. This pump installs directly into the OE Polaris assembly and does not require canister modifications of any kind.  The pump is dimensionally and functionally identical to the OE pump motor, originally manufactured by Bosch for Polaris. 

The installation kit includes several items designed to extend longevity beyond the original pump.  Two ethanol-safe corrugated flex hoses are included, as well as a Viton ethanol-safe fuel pump o-ring, and an ethanol-safe 30-micron polyethylene filter strainer.  With pump gasoline now infused in most parts of the country with as much as 15% ethanol, compatibility with multiple fuel blends is an essential requirement for all fuel pump components-- not only the pump itself. 

Our pump development of the HFP-396 started in 2013, starting with the same proven 30mm design from our HFP-389 pump used in KTM and Husqvarna applications and specifically designed for sustained hot climate operation.  A weak point of the factory Polaris fuel pump motor is its inability to withstand extreme temperatures.  Riders have found themselves on the trail or in the desert unable to restart their machine after only 20-30 mins of continuous run time.  Once the pump has cooled down it will sometimes resume normal operation, eventually requiring replacement.

• OEM or better performance
• Black plated corrosion-resistant case
• Direct drop-in replacement
• Gradient density 30-micron fuel strainer for superior contaminant filtration
• Integrated check valve to ensure fast start-ups

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

Wossner

For more than 35 years, Wössner has been designing and producing high- performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Needle Bearings (Little End Bearings)

Please use our Fitments Tool to ensure the correct part is ordered.

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

KoubaLink specialises in motorcycle lowering and performance linkages for off-road and dual-sport rear suspension systems. Compromise is not an option at KoubaLink. Listening to riders from all over the world explain where and how they use their off-road and dual-sport bikes. With their input, Koubalink manufacture products that add to your motorcycling experience and make it a little more enjoyable.

• Provides better front-end stability by lowering rear suspension geometry
• Machined from billet aluminium
• Stronger than OEM
• Pre-installed OE style bearings included
• Replace linkage like its OEM
• Includes all required bearings and seals for assembly (Excluding Dog Bone styled linkages that do not include bearings and seals from factory)

Kit contains bearings, seals, and o-rings required to rebuild the transaxle.

Features:

• Direct OEM replacement at a fraction of the cost.
• High-quality ABEC 3 precision ball bearings used throughout.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, this differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

Oxford Premium LED Turn Signals are compact, bright and sold with resistors (in case you need to adjust your flash rate).

Features:

• LED array.
• Matte black finish.
• Waterproof.
• Short stem.
• Includes resistors (optional, if needed).
• Sold as a pair.

All Balls Wheel Bearing Kit

Hands down, the most complete line of wheel bearing & seal kits!
All the bearings and seals required to refit a wheel in one convenient package.
Premium high-speed bearings feature low drag, double lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention.
High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications.
Type TC, Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt whilethe rubber coated outside diameter creates an optimum seal at the hub.
Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.