HARD PARTS

Replace your old and worn ball joints with Whites range of Heavy-Duty Ball Joints, perfect as an upgrade to your OEM ball joints or replacement for worn joints. Constructed with a heavy-duty steel outer housing and a premium bearing cup, which keeps the ball end isolated from the outer housing, extending the life of the joint.

Features:

• Heavy-duty steel outer housing.
• Premium bearing cup.
• The ball end is isolated from the outer housing.
• Meets and exceeds OEM specifications.
• Extended life.

Note: Ball Joints are model-specific, it is recommended that you use our fitments search to ensure correct fit.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Harness the flexibility and intelligence of your BMW motorcycle's CANbus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.

Features:

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergency's.
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop-down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On-Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

These tapered DAC bearing kits offer great static performance and dynamic load capacity. The high-performance, tapered bearing delivers a 95% static load and 86% load-carrying capabilities, on average, when compared to standard DAC bearings.

Features:

• High contact, double-lip seal with armour shield.
• O-rings feature a sealed ID to provide superior water and dirt exclusion.
• 52100 bearings are hardened and tempered steel for maximum durability.
• Sold individually.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

All Balls Wheel Bearing Kit

Hands down, the most complete line of wheel bearing & seal kits!
All the bearings and seals required to refit a wheel in one convenient package.
Premium high-speed bearings feature low drag, double lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention.
High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications.
Type TC, Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt whilethe rubber coated outside diameter creates an optimum seal at the hub.
Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets necessary to rebuild the water pump.
• Designed to fit O.E.M. water pump.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Heigh t: 2.5in (64mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Width: 5.688in (144mm)
• Length: 11.063in (281mm)
• Weight: 1.2 lb (0.5kg)
• Filter Re-Oiling Amount: 0.54oz (16ml)

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

4-pack of replacement Fuel Star fuel line clamps for the All Balls Complete OEM Style Fuel Line Clamp Kit.

• Inside Diameter: 10.3mm
• Clamp Style: Wire
• Quantity: 4

Brand new aftermarket Manifold Absolute Pressure Sensor (MAP)

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation

Dimensions:

• Width: 28 mm
• Length: 56 mm
• Height: 14 mm

Other specifications:

• Number of plugs: 1
• Number of terminals: 4

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

K&N Powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N Powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy removal. The 17mm nut is crossed-drilled so racers can safety wire the filter to their bike.

Features:

• O/E replacement oil filters for most cars, trucks, SUVs, motorcycles, and ATVs.
• 17mm exposed nut designed for easy oil filter removal.
• Heavy-duty construction for extreme conditions.
• Anti-drain back valve (where applicable) eliminates dry starts.

Specifications

• Styl e: Canister
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Outside Diameter: 68mm
• Height: 87mm
• Removal Nut: Yes
• Thread Specification: M20 x 1.5

Replacement ignition key switch for your motorcycle/ATV. Direct replacement to the original unit this unit provides excellent plug-and-play, direct fit functionality providing simple, quick & easy installation. Two keys & all connectors are included.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Two keys included
• Connector included

Dimensions:

• Length : 7mm
• Width: 4mm
• Wire Length: 300mm

Other Specification:

• Number of wires: 2
• Number of plugs: 1
• Number of keys: 2
• Number of positions: 2 (Off/On)

Constructed using a specific heat-treatment to ensure hardness for maximum durability and less wear and precision machined to match exact sizing requirements. Each size is sold individually as a pack of 5 to reduce costs when only requiring a particular size or restocking your valve shim pack.

Most 250cc 4-strokes use 7.48 mm OD shims, most 400cc and up 4-strokes use 9.48 mm OD shims, and KTM models use 10 or 8.90 mm OD shims.

Features:

• Heat-treated ensuring hardness for maximum durability and less wear.
• Precision machined to match exact size.
• Each size sold individually to keep cost down.
• Works with stock or aftermarket cams.
• Sold as a pack of 5.
• Sizes available:
  • 7.48mm x 1.20mm - 3.50mm in 0.05mm increments
  • 9.48mm x 1.20mm - 3.50mm in 0.05mm increments

Brake shoes 

The Whites Brake Calipers are designed to withstand harsh and extreme off-road environments and are the perfect cost-effective alternative to replacing your OEM brake calipers.

Including pre-fitted brake pads, mounting bracket, banjo bolt and crush washers, the caliper is ready to install on arrival. Whites Calipers are model and position-specific — we recommend using our fitment finder to find the correct caliper for your model.

Whites Brake Caliper also produces for one of the world's leading and most recognised OEM calliper names. Quality is assured when you buy Whites brand calipers.

Features:

• OEM replacement
• Built to endure harsh riding environments
• Includes banjo bolt and two crush washers
• Includes pre-fitted brake pads
• Includes removable brake pins
• Cost-effective OEM alternative

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Vertex valves follow high-end OE specifications, using steel or titanium with a pressurised hardness treatment.

• Follows high-end OE specifications.
• High-quality steel or titanium valves.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

All Balls Fuel Pump Kits are designed to restore lost performance caused by a failing or non-functioning fuel pump. Each kit offers a plug-and-play solution for quick and easy replacement of your OEM fuel pump module.

Kit contents vary by application and may include components such as the pump, filter, hoses, clamps, and wiring harness. Some kits contain only core components like the pump and filter. Please refer to the product image and listing details for exact contents specific to your model.

Features:

• OEM replacement fuel pump kits.
• Plug-and-play installation.
• Contents vary by kit — check image and listing for details.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.