HARD PARTS

Fuel pump strainers act as a first line of defense against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications
• Designed to ensure optimal filtration to prevent fuel system contamination
• Strainer material tested and validated for capacity and efficiency by accredited third party

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non- operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Motorcycles, ATV's and UTV's are used in some of the harshest environments, dust filled air, mud and rain are all ideal environments for mechanical failure. The fuel filter is the fuel systems defence against contamination, from dirt and dust or particles in pump gas, over time your fuel filter will clog as it filtrates your fuel restricing flow and causing your fuel pump to work under additional stress which can cause premature failure. Replacing your fuel filter is inexpensive preventative maintenance which improves fuel quality, fuel flow and increases the life of your fuel pump. It is recommended to replace the fuel filter every 6-12 months dependent on application and usage.

Increases fuel flow
Improves fuel quality in engine
Reduces stress on fuel pump
Inexpensive preventative maintenance
OEM replacement
Built to meet and exceed OEM specifications

A quality heavy-duty motorcycle inner tube for increased puncture resistance.

Each bike manufacturer uses different connectors for their indicators. This means that when fitting universal aftermarket indicators you need to cut the original connectors off and replace them with bullet fittings.

Not any more! Simply connect the IndyLeads between the original connector and the universal connector. Simple.

2 pack for front OR rear.

If you're restoring that classic ride to its former glory or manufacturing a custom masterpiece Whites Rear Shocks are perfect for the job. In a range of different chrome plating and black powder coating combinations, we have the right shock for the job. The progressive rate spring provides bottoming resistance with improved damping for an extra comfortable ride.

Steel construction shock body
Multi-stage velocity-sensitive hydraulic dampers
Progressive rate spring provides bottoming resistance
Upgraded damping provides an extra comfortable ride
Shocks are measured fully extended from eyelet to eyelet centre
Multi-position adjustable
Sold as a pair

Spring Colour: Chrome Plating
Absorber/Body Colour: Black Powdercoat
Cap Colour: Black Powdercoat
Top Mount: Bushing
Bottom Mount: Bushing
Length: 365mm

We have been stocking these aftermarket shocks for many years without issue, however, they are supplied without warranty - as the final use and application are beyond our control and they may exceed the products' design limits.

If you're restoring that classic ride to its former glory or manufacturing a custom masterpiece, Whites Rear Shocks are perfect for the job.

Available in a range of different chrome plating and black powder-coating combinations (depending on fitment model), we have the right shock for the job. The progressive rate spring provides bottoming resistance with improved damping for an extra comfortable ride.

Features:

• Steel construction shock body.
• Multi-stage velocity-sensitive hydraulic dampers.
• Progressive rate spring provides bottoming resistance.
• Upgraded damping provides an extra comfortable ride.
• Shocks are measured fully extended from eyelet to eyelet on centres.
• Multi-position adjustable.
• Kit is supplied with three bushing sizes to ensure best fit.
• Sold as a pair.

Specifications:

• Spring Colour: Chrome Plating
• Absorber/Body Colour: Black Powdercoat
• Cap Colour: Black Powdercoat
• Top Mount: Bushing
• Bottom Mount: Bushing
• Eyelet internal diameter: 25.4mm (1")
• Kit is supplied with three bushing sizes to ensure best fit:
  • 9.4mm (3/8")
  • 11.4mm (7/16")
  • 13.4 mm (17/32")
• Length: 365mm

Note: We have been stocking these aftermarket shocks without issue for many years. However, they are supplied without warranty, as the final use and application are beyond our control and they may exceed the products' design limits.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets necessary to rebuild the water pump.
• Designed to fit O.E.M. water pump.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

PH SERIES – Street Sport “Sintered”

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. Available for part numbers shown below - prefix with “PH to specify. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

DENALI Motorcycle Specific Horn Mounts

Available for many ADV, Cruisers and Sport Touring Models. The laser cut and powder coated steel brackets mount our SoundBomb Horn inthe most discrete and attractive location possible.

Whites lighting range is a collection of high-quality indicators (flashers), tail lamps, headlights and more. Available as direct OEM replacements and universal fitments for those one-off custom rides. Offered in a range of shapes, sizes, styles and mounting options Whites are here for your motorcycle lighting solutions.

Whites Universal fitting flashers are a great alternative to pricey and boring OEM indicators. Perfect for those one-off custom rides or additional style for your off the showroom floor ride. Built to high-quality specifications with durable construction for long-lasting life.

• Universal fitment
• E-Marked
• Sold as a pair
• Great OEM replacement
• Ideal for one-off custom machines
• Carbon styled finish
• Shape: Diamond
• Colour: Carbon
• Ligh t Type: LED

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The new multi-density grips feature large soft diamonds to provide ultimate feel, comfort and grip.

The cushioning material is strategically placed along the shaft of the grip in the form of squishy diamonds. The additional cushioning offers excellent dampening against vibration and hand fatigue.

The multi-diamond design is one of the most popular MX grips styles. Why? Because the unique traction pattern of both large and small soft gel-like diamonds maximizes comfort and grip, thus improving feel and reducing rider fatigue.

Features:

• Dual-compound design for increased durability.
• Gel tack surface designed to offer exceptional grip.
• Diamond design helps reduce hand and arm fatigue and blisters.
• Full large and small diamond pattern.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

One kit does it all! All of the bearings, seals, shafts*, bushings, and thrust bearings (if required) in one all-inclusive kit to do the job correctly and completely.

• All bearing shafts manufactured with 52100 bearing steel that is hardened and centerless ground for a precision fit and extended wear life.
• Steel spacers are case-hardened and plated for resistance to wear and corrosion.
• No more hunting around for missing pieces costing you time and extra money.
• Needle thrust bearings have been replaced with Teflon bearings. Designed to live longer in water and dirt.

* Not included in all kits.

Note: A limited number of kits only available with bearings and seals.

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger
Available in Black, Blue, Green, Orange & Red

The Whites Grip Donuts are designed to prevent blisters on the inside of your thumb and index finger while providing additional grip.

Prevents blisters on thumb and index finger.

The Whites Inner Cable Bowden is a high-strength and durable inner cable, galvanised for corrosion and weather resistance. Supplied in a 25ft roll perfect for workshop use when creating custom length cables or replacing classic OEM cables that are no longer available.

Available in three different diameters, all in a 25ft roll, we have the ideal inner cable for you.

Features:

• Smooth operation.
• Ideal for custom cables.
• Diameter: 5mm
• Length: 25ft

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.