New Arrivals

PV SERIES – Semi-Sintered Pads

New high durability semi-sintered pads that have the brake response of an organic but the durability of a sintered pad. For sport bike use only.

NOTE: This Vertex Oil Seal Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include all oil seals necessary to rebuild the engine and transmission including crankshaft, output shaft, water pump, clutch, and shifter seals.

PH SERIES – Street Sport Sintered

High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. PH brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use. PH series is no longer available for off-road applications following the formulation improvements of the PR range for Moto-X and ATV applications.

K&N Powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N Powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy removal. The 17 mm nut is crossed-drilled so racers can safety wire the filter to their bike.

Features:

• O/E replacement oil filters for most cars, trucks, SUVs, motorcycles, and ATVs.
• 17mm exposed nut designed for easy oil filter removal.
• Heavy-duty construction for extreme conditions.
• Anti-drain back valve (where applicable) eliminates dry starts.

Specifications:

• Sty le: Canister
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Height: 100mm
• Outside Diameter: 75mm
• Thread Specification: 3/4 IN. 16 UNF
• Removal Nut: Yes

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

KoubaLink specialises in motorcycle lowering and performance linkages for off-road and dual-sport rear suspension systems. Compromise is not an option at KoubaLink. Listening to riders from all over the world explain where and how they use their off-road and dual-sport bikes. With their input, Koubalink manufacture products that add to your motorcycling experience and make it a little more enjoyable.

• Provides better front-end stability by lowering rear suspension geometry
• Machined from billet aluminium
• Stronger than OEM
• Pre-installed OE style bearings included
• Replace linkage like its OEM
• Includes all required bearings and seals for assembly (Excluding Dog Bone styled linkages that do not include bearings and seals from factory)

The Combi 6 Is a great value combination cable lock.

Features:

• Pre-set 4-digit combination.
• Lightweight, self-coiling cable.
• Plastic sleeve to protect paintwork.
• Great value.
• 6mm x 1500mm

The S3 sintered compound is optimal for street bikes, dual sport, touring, and cruisers. It's recommended on applications with rather larger engines or for people who ride harder than average and want the great stopping power of a sintered brake pad.

The S3 series is designed for low abrasive interaction with the rotor and quieter braking because of the ceramic composite material. It has an HH friction rating and performs better at higher temperatures than our AD compound.

Friction materials contain metal-ceramic with a bronze-graphite and non-metallic friction additives are spread evenly on the base fine bronze body to achieve optimal friction properties.

Features:

• Very high static friction coefficient.
• Minimal difference between wet and dry braking performance.
• Good abrasive resistance.
• Thermal stability up to 450°C, and even up to 800°C over a short term.
• Low abrasive interaction with the brake rotor material.
• Longer life compared to organic and kevlar composite materials.

Range of Applications:

• Recommended for larger street bikes.
• For riders who demand a bit more than average from their bikes.
• Recommended on both front and rear brakes.
• Works well on both dry and wet conditions.
• Could also be used on the front brakes for off-road bikes and ATV.

These HotGrips™ have been designed specifically for 50-250cc scooters and smaller motorcycles which typically have smaller batteries and less powerful charging systems. They're ideal for commuting and city riding and everything is included for easy fitment, including the correct drill bit for the panel-mounted switch.

Key Features:

• Sealed for life
• Rainproof, panel-dash fit switch with two heat settings
• Draws under 3A
• Up to 45°C
• Durable rubber tread absorbs vibrations while providing good levels of grip and can be cut to size
• Unique Oxford tread design
• Removable chrome end caps keep original styling

This product has been designed to fit the Yamaha T7 Ténéré 2019-onwards.

This stainless steel kit provides 80mm of adjustment over the stock screen. In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable, and airflow underneath your screen reduces the vacuum effect, creating smoother airflow and reducing turbulence. In the lowered position, the screen sits at the same height as stock.

To adjust the screen, simply loosen the thumb nuts, slide into position, and re-tighten—no tools required.

WMP Exhaust Wrap is a 50mm wide, 5-metre roll designed to help retain heat within the exhaust system. Maintaining hotter exhaust gases reduces their density, allowing them to exit the system faster and helping the engine breathe more efficiently. Stainless steel ties are included to secure the wrap in place.

Features:

• 5m roll of 50mm wide exhaust wrap.
• Temperature rating: 700°C.
• Includes 4 stainless steel locking ties.
• Colour: Gold.

In the early 1960s, two motorcycle racers, Ken Johnson and Norm McDonald (K&N) developed a ground-breaking new idea for an air filter. After experimenting with numerous types of filter media, they discovered that an oiled cotton design allowed the filter to not only capture contaminants very efficiently, but also allowed it to be washed and reused, and the original K&N High-Flow Air Filter was born. Five decades later, K&N is still innovating industry-leading filtration technology. In addition to performance air filters, K&N® now manufactures a variety of other protection and performance products, including air intake systems, oil filters & fuel filters, with a reputation for exceptional quality and customer service.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features

• Designed to provide increased horsepower and torque
• Pleated media provides a large filtration area offering long service intervals
• Multiple layers of woven cotton gauze media offer excellent filtration
• Application-specific base seal and sealing bead
• Made in the USA for over 40 years
• Washable & reusable, pre-oiled and ready to ride!

Specifications

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 29mm
• Outside Length: 337mm
• Outside Width: 152mm
• Filter Re-Oiling Amount: 27ml

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

One kit does it all! All of the bearings, seals, shafts*, bushings, and thrust bearings (if required) in one all-inclusive kit to do the job correctly and completely.

• All bearing shafts manufactured with 52100 bearing steel that is hardened and centerless ground for a precision fit and extended wear life.
• Steel spacers are case-hardened and plated for resistance to wear and corrosion.
• No more hunting around for missing pieces costing you time and extra money.
• Needle thrust bearings have been replaced with Teflon bearings. Designed to live longer in water and dirt.

* Not included in all kits.

Note: A limited number of kits only available with bearings and seals.

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

The All Balls Exhaust Gasket Kit includes the seals required to create a secure, leak-free connection between the engine and exhaust system. Replacing worn or damaged exhaust gaskets helps prevent exhaust leaks, maintain engine performance, and ensure proper exhaust flow.

Features:

• Manufactured from high-quality multi-layer steel, graphite, or ceramic materials, depending on the application.
• Designed to withstand extreme exhaust temperatures and harsh operating conditions.
• Direct OEM-style replacement for easy installation.
• Suitable for motorcycles, ATVs, and UTVs.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

OEM spacers typically wear out within a year of hard riding. The wheel spacers should be checked and replaced as needed with every bearing service. Water and dirt act as a grinding compound between the seal face and the mating surface of the spacer. Once the grooves are deep enough, the sealing surface is lost, allowing water and dirt to pass through and contaminate the bearing.

Wheel Spacer Kits are designed to restore the proper sealing surface between the wheel seal and spacer, helping protect wheel bearings from premature wear and failure. Manufactured to precise tolerances for a direct replacement fit, All Balls spacers provide a smooth, durable surface for the seal to run against, reducing the risk of contamination and extending bearing life. Ideal for routine maintenance or during wheel bearing replacement, a quality wheel spacer kit ensures reliable wheel performance in harsh riding conditions.

Avoid those annoying knocks and scratches to your tank by using the new Transformer tank pad. Your tank cannot avoid contact with you and your riding gear, without protection damage is inevitable. The modular design allows for a custom fit to almost any tank shape. A matching set of knee pads is also available.

Features:

• Universal modular design.
• Textured grip finish.
• Fits a variety of tank shapes and sizes.
• Pre-cut 3M adhesive material.
• Template included.
• Protects paintwork.
• Matching Knee Grips available: OXOX799
• Size: 205mm (W) x 200mm (H) (lower width 100mm)