New Arrivals

A quality Steering Head Bearing kit from All Balls. Make your bike handle like new!

Features:

• Upgrade ball-type steering bearings to Heavy-Duty Tapered Bearings
• Higher torque load and better wear than OEM ball-style steering bearings.
• Each kit is complete with upper and lower bearing sets and seals.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Inner clutch cover gasket
• Designed to fit O.E.M. cover

Bolt brand bolts, nuts and washers meet all OEM standards. Designed with precision, each bolt comes in a convenient pack of 10.

CK - Fibre Kits: Original Equipment quality anti-swell, cork-based, asbestos- free clutch plates. Packed in engine sets.
RK - Complete Kits: Dirt Racer Clutch sets are a complete set of CK series heavy duty cork-based, lined plates, plus heavy duty clutch springs & steel separator plates. Many off road machines have aluminium alloy separator plates fitted from new which wear out quickly
& cause premature clutch slip. The steel units in the DRC kits prevent this & re-establish clutch stack height. PBPSK - complete kits: These complete kits include Kevlar fibre lined friction plates, steel separator plates and springs to provide a street going kit for high performance street and road race use much similar to the DRC program for off road. Some of the kits will now feature new DIAPHRAGM springs as used in many larger new bikes to provide a complete clutch rebuild kit for every sport bike possible.
CSK - Spring Kits: (10% heavier than standard springs). CC_EP - Extra Plate Clutch Kits:Premier ‘EP' kits are built withUS Made Dupont Kevlar fi Original Equipment Quality anti-swell cork-based asbestos free clutch plate sets. Packed in engine sets. CK Series Clutch Kit

CK OE Quality anti- swell cork-based asbestos free clutch plate sets.
Packed in engine sets.

Possibly the ONLY waterproof, dustproof, mudproof, snowproof Fender Bag + Number Plate Bag available today, Giant Loop’s adventure proof version offers secure connections for most dirt bike plastics. When properly installed, it’s there to stay no matter what! Sized to fit a full-length set of tyre levers and other relatively small, lightweight essentials, such as a spare inner tube, CO2 inflator, spare gloves, etc.

The roll-top Giant Loop Fender Bag + Number Plate Bag is RF-welded, 100% waterproof, dustproof, mudproof, snowproof and a roomy 3.5-litres in volume.

Features:

• Volume: 3.5 litres
• Dimensions: 266.7 x 139.7 x 76.2mm
• Weight: 368.5g when empty
• Includes 2 Rubber Boa Straps – mil-spec elastic shock cord with heavy-duty injection-moulded components
• 500D PVC tarpaulin body
• Roll-top closure with side-release buckles
• Multiple daisy chain webbing lash points for additional anchor points

Ideal general replacement to OE for all motorcycle sizes: street/dirt/ATV.

• OE-quality anti-swell cork-based product.
• Aluminium particles impregnated to increase wear life and heat resistance.
• Asbestos-free clutch plate sets.
• Packed in engine sets.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Wossner

For more than 35 years, Wössner successfully designs and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

HFP replacement fuel pumps, modules, assemblies, and kit components are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Quantum replacement fuel pumps, regulators, tank seals and strainers are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features & Benefits

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

All Balls Counter Shaft Washer Kit is made from premium products.

Kit includes 10x replacement counter shaft washers.

With certain BMW motorcycle models, the spark plug caps and coils are combined to reduce the number of parts used in order to improve efficiency. However, when the spark plug cap wears out, the cost of the replacement becomes more expensive. If you are experiencing ignition problems, this could mean the ignition cap coil needs to be replaced. Simple, easy to install, affordable, and improves engine performance.

Features:

• Direct replacement to your original unit.
• Quality exceeds the OEM equipment.
• All products shipped are tested.

Specifications:

• Len gth: 157mm
• Resistance primary: 1-3 1.0 ohm
• Resistance secondary: 2 -4 16.25 ohm

Note: All item pictures are accurate. If in doubt, do not hesitate and compare our item to your original part.

Oxford's new premium Paddock Stands are stronger and easier to use than anything that came before.

A compact frame construction makes them very rigid and very stable. At the same time, an elongated handle provides excellent leverage, so lifting your bike requires minimum effort.

Their powerful construction makes these stands suitable for the widest possible range of applications - from lightweight to big bikes - and rear stands come with both L-shaped cups for swing arms and forks for bobbins.

Features:

• Heavy duty steel clamps for maximum rigidity.
• Ultra-strong frame with compact construction with 38mm tubular steel frame.
• Extra torsional supports give increased rigidity.
• High-quality double wheels allow a smooth lift and maximum stability under load.
• Elongated handle design which helps give more leverage and a controlled lift.
• Both L-cups and Forks for bobbins provided for rear stands.
• Plasticated pins for fitting to front forks. One simple fitting system included.
• Two position adjustment screws ensure security and stability.
• Max load: 250kg

Note: For wheels up to 17 inches.

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

Oblong key blank for the following Oxford locks.

• Revolver (all)
• OF169/OF170 Sentinel
• OF182 Magnum2000
• LK283/4 Arma20

Dimensions:

27 x 2.76 x 6.5 x 2.0mm (Alternative Key 6)

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

The MTX cable range is engineered to meet or exceed OEM cable specifications. The MTX cable range includes throttle, brake, clutch, and speedo cables suited to fit a wide range of motorcycles.

MTX cables are constructed with an inner nylon sleeve and a black vinyl housing to ensure long life while retaining smooth operation during use. MTX cables are designed to replace or upgrade OEM cables that are worn or degraded.

• Meets or exceeds OEM quality cables
• Black vinyl housing for cable protection
• Inner nylon sleeve provides smooth operation and a long life

Quality brake rotor from All Balls.

Features:

• 420 Stainless steel provides excellent corrosion resistance.
• Hardened to 36HRC for excellent braking performance and durability.
• Precision ground surfaces.
• engraved with part number and minimum thickness specification.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.