New Arrivals

Includes all gaskets and o-rings necessary to complete a crank (bottom end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set is your one-stop shop for engine rebuilds.

• Designed for OEM replacement
• Made from high-quality materials
• Meet or exceed OEM specifications
• Competitive pricing

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The DENALI DOT approved M5 LED Headlight module is a direct plug and play replacement to your original 5.75 inch sealed beam headlight. It features a super wide low beam, piercing high beam, and halo day time running light. Drop this headlight module inside your motorcycle's existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike that modern custom look while also increasing your visibility to oncoming traffic even during daylight.

Features

• Directly replaces OEM 5.75" Headlight
• Plug & play with H4 connectors
• Premium LEDs boast an average life span of 50,000 hours
• DOT High & Low Beam
• Robust aluminum housing
• Halo daytime running light
• Black chrome finish
• Enhances visibility and safety
• IP-68 Waterproof 

Product Specs

• Pod Size 5.75” Round x 2.1” Deep
• LED: (2x) Cree XML, (1x) Philips Altilon C-4, (2x) Cree XPG2, (30x) Philips Luxeon 3014
• Beam Distance: High 500ft, Low 525ft
• Intensity: DOT High/Low
• Input Voltage: 9v-32v DC
• Power Draw: High 19 Watts / Low 19 Watts / Halo 6 Watts
• Beam Angle: DOT High/Low
• Waterproof: IP-68

What's In The Box?

• (1x) LED Headlight Module 
• (1x) Posi-tap
• (1x) Posi-lock
• (1x) 3ft length of 18 gauge wire

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

This XA14 is a super strong motorcycle and scooter alarm disc lock.

The Alpha XA14 has a key replacement service so that if you are unfortunate enough to lose all your keys a new one can be made up. Just remember to take note of your key number and keep this in a safe place.

The Oxford Alpha XA14 alarm has been independently approved by Sold Secure (Gold standard), Classe SRA and ART 4.

Features:

• Super strong forged stainless steel construction
• Loud 110dB motion-activated alarm siren
• Powered by a long-life lithium CR2 battery
• Twin-spar lock chassis for double strength and cut resistance
• 14mm diameter T-locking pin anchors the lock together
• Toughened attack-proof lock cylinder
• Integrated loop for reminder cable attachment (cable sold separately)
• High-tech pick-resistant locking system
• Includes 3 keys

These wheel bearing kits feature high-speed bearings that are manufactured to ABEC 3 precision levels, and triple lip rubber seals that keep the grease in and the water and dirt out all while utilizing a Chevron SRI 2 grease that contains rust and oxidation inhibitors. Install these Bearings and enjoy trouble-free riding for years to come.

Features:

• Precision high-speed bearings manufactured to ABEC3 standards.
• Each bearing is packed with Chevron SR-2 grease.
• The seals use double lips to stop dirt from entering.

DENALI Motorcycle Specific Fairing / Fender Mounts

Available for most ADV, Cruisers and Sport Touring Models Laser cut and powder coated steel brackets either position the lights in the optimum location just below to the outside of the headlight, or create a two-point fender mount strong enough to mount our largest lights to your fender.

• Precision machined from high-grade 304 Stainless Steel.
• Stainless steel reduces thermal conductivity by up to 93% compared to aluminium.
• Plastic composite pistons are prone to damage and become brittle with age.
• OEM chrome-plated steel and aluminium pistons are prone to corrosion.
• Eliminates failure prone ceramic inserts found on some KTM models.
• Each kit contains piston or pistons to rebuild one caliper.

Part of Oxford's Advanced Accessories range, the Oxford Airflow MT Mini is a foldable, space saving, mini track pump with built-in pressure gauge.

Features:

• Fits Presta and Schrader valves.
• Built-in pressure gauge.
• Aluminium barrel.
• Valve lock.
• Fold-out T-handle and foot pad.
• 20cm extendable hose.
• Carry bracket included.
• Max. Inflation: 140 PSI

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Celebrate being part of the coolest family on earth with our collection of biker signs.

Whether you commute to work on a sensible 125, cross continents on a metal mule or tear up the weekend streets on your pride and joy... you belong.

With pre-drilled holes for mounting, Oxford's Garage Signs are also the perfect gift for the biker who's got it all!

Features:

• Indoor use only.
• Made from high quality coated metal tin plate with rolled edges.
• 4 x 3.2mm pre-drilled holes for attachment.
• Dimensions - 30 x 20cm x 0.25mm thick.
• Weight - 124g
• Different styles and mottos available.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Replacement lock barrel for Giant Loop pannier mounts 

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

K5 Series:

The K5 sintered compound is optimal for off-road motorcycles and ATVs. It is recommended for riders who demand great off-road stopping power and brake pad durability when riding on tough off-road terrains. The K5 series is designed for low abrasive interaction with the rotor, long life and self-cleaning capabilities necessary in off-road riding conditions. Friction materials contain metal-ceramic with a sophisticated bronze-graphite and full-metal mixture formulation with fine friction particles to achieve optimal friction properties.

Features:

• High static friction coefficient
• Good abrasive resistance
• Self-cleaning capability
• Low abrasive interaction with the brake rotor material
• Up to 3 times longer operational life compared to organic and Kevlar composite materials

Application:

• Developed specifically for off-road motorcycles & ATVs
• Can be used on both front and rear brakes
• Could be used on the rear brake of road racing motorcycles

Operating Parameters:

• Specific pressure: 2.0 Mpa
• Sliding velocity: 20 m/s
• Constant maximum temp: 500°C
• Short time maximum temp: 750°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

This D4 Waterproofing Gasket is an replacement for the lens gasket of a D4 light pod.

What’s In The Box?

• (x1) D4 Waterproofing Gasket

If you've broken your mirrors, don't worry. We've got you covered with our range of OEM-style Whites Mirrors. The right-specific mirror offers an affordable solution when only one mirror needs replacing. Designed to meet or exceed OEM specifications, Whites Mirrors provide a high-quality, cost-effective alternative to your original mirrors. Available for most makes and models, we recommend using our fitment search to find the perfect mirror for your bike.

Features:

• OEM replacement part.
• OEM-styled.
• Competitive pricing.
• Right mirror only.

All Balls Choke Plunger Kit

- Choke plunger rebuild kits are intended to be used as a repair kit only.
- Kit contents will vary and may include o-rings, springs, retaining nuts, boots and cable guides as necessary.
- Choke plungers can seize or can easily be lost during a carburetor rebuild.
- Improperly functioning parts can cause hard starting or poor running conditions.
- Models with multiple carburetors include components to repair each choke plunger.

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• The quality exceeds the OEM equipment
• All products shipped are tested

Specifications:

Dimensions:

Other specifications:

• Number of plugs: 2
• Number of wires: 2
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Note: Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY

High-quality plastic cable ties — the perfect accessory to have at the ready in the garage, workshop or at the track. Ideal for cable management, simply tying something together or last-minute quick fix repairs. Whites Cable Ties are available in 9 different sizes with 100 cable ties per bag.

• High-quality plastic cable ties
• Great for the garage, workshop and at the track
• Cable management
• Last-minute trackside quick fix repairs
• 9 sizes available
• Size: 195mm x 4.8mm
• Quantity: 100

Quality king pin kit from All Balls Racing. Features steel bushings, needle- bearing shaft and seals. Great value.

High-quality plastic cable ties — the perfect accessory to have at the ready in the garage, workshop or at the track. Ideal for cable management, simply tying something together or last-minute quick fix repairs. Whites Cable Ties are available in 9 different sizes with 100 cable ties per bag.

• High-quality plastic cable ties
• Great for the garage, workshop and at the track
• Cable management
• Last-minute trackside quick fix repairs
• 9 sizes available
• Size: 100mm x 2.5mm
• Quantity: 100

A Quality Fork Bush from All Balls Racing. 

*This is just a single bush