New Arrivals

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong moulded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Hundreds of sizes and shapes for most applications.
• High airflow with excellent filtration.
• Clamp-on washable and reusable air filter.
• Malleable flanges.

Specifications:

• Filter Material: Cotton Gauze
• Base Outside Diameter: 76mm
• Top Outside Diameter: 51mm
• Height: 76mm
• Flange Inside Diameter: 46mm
• Flange Length: 16mm
• Flange Type: Centred

The Whites Inner Cam Bearing Removal/Installation Tool is the perfect tool for replacing/servicing cam bearings on all Harley Davidson Twin Cam 88 engines. The tool is designed to press on the outer ring of the bearing, eliminating damage to the bearing, cam or cases, while the press adaptor will set the bearing at its proper depth. The tool lines up with the bearing bore for a perfect fit every time, prevents pin rollers from the bearing falling into the crankcase and is compatible with both 7/8" and 1" I.D bearings.

Lines up with bearing bore for a perfect fit
Sets bearings at the correct depth
Prevents pins falling into the crankcase
Eliminates damage to the bearing, cam or case
Compatible with 7/8" and 1" I.D bearings
Supplied in a convenient case for manageable storage

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

BULLETPROOF WITH HIGH CONTRAST ANTI-FOG LENS

The Velocity 5.5 Cryztal are high contrast, high-performance goggles. They feature a bulletproof, permanent anti-fog, WideVision lens, allowing you to look ahead without fear of roost or loose gravel. The Cryztal lenses are designed to enhance colours and sharpen visuals, making them excellent for early morning or evening rides.

The Velocity 5.5 Cryztal goggles have a tapered shape to fit helmets with tighter eye ports, with a Tear-Off pack included for those muddy or dusty rides. All-day comfort is guaranteed with triple-layer comfort face foam and anti-sweat fleece backing. A self-draining open lower frame allows dirt to fall from the lens, and an OTG design accommodates prescription glasses. With high clarity and exceptional eye safety, the Velocity 5.5 Cryztal goggles provide the right look for any rider.

Features:

• Bulletproof 170° WideVision permanent anti-fog lens.
• Cryztal lens
  • Enhances colours, contrast, and sharpens visuals.
• Roll-off ready for our WideVision 48mm system (optional).
• Triple-layer, dual-density comfort face foam and anti-sweat fleece backing.
• Self-draining open lower frame design allows dirt to fall from lens.
• Out-riggers with a 45mm anti-slip coated strap.
• Tapered custom shape to even fit helmets with tighter eye ports.
• OTG – Over-the-glasses fit.
• Tear-off ready with posts. Tear-off pack included.
• Bulletproof Lens impact tested to:
  • ANSI Z87.1-2015
  • Military Ballistic Impact Standard (MIL-DTL-43511D)
• Certified CE EN 1938:2010
• Complies with PPE Regulation (EU) 2016/425
• Optional lenses available.
• Plastic-free packaging.

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

Quantum replacement fuel pumps, regulators, tank seals and strainers are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features & Benefits

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB014
  • Outer: WPAXCVB014
• Please confirm suitability for your year, make, and model prior to purchase.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets necessary to rebuild the water pump.
• Designed to fit O.E.M. water pump.

The Whites Clutch Fibre Kit is the easiest and best replacement for your clutch. The kit has complete compatibility with your OEM clutch components. The Whites Clutch Fibre Kit comes as a complete set made from quality friction and base materials that maintain your OEM stack height to ensure minimal slippage, great power transfer, an excellent clutch feel, and hours of proper clutch operation.

Features:

• Made to OEM specifications to offer maximum performance and durability.
• Complete set of fibre friction plates.
• Set of replacement friction plates for your motorcycle or ATV.
• Reduces slip, fade, and poor lever feel.

Note: Actual kit pictured.

Kits will feature new diaphragm springs as used in many larger new bikes to provide a complete clutch rebuild kit for every sport bike possible.

EXHAUST MUFFLER CONNECTOR 60.5x69x35mm

Whites Motorcycle Covers offer premium protection at a value price!

Featuring a heavy-duty waterproof material with taped seams, this UV-resistant breathable cover makes a fantastic all-season option. With the non-scratch soft felt lining, you can be assured your pride and joy will be in good hands.

Whether it's sun, rain, dust, snow or birds, Whites Covers will cover all your PWC storage needs!

Features:

• Dimensions (cm): 360 x 90 x 170
• Double stitching for strength and durability
• Elastic sewn-in front and rear for easy fitting
• Underbelly ties for a secure fit
• Eyelet provision allows for a security lock
• Reusable carry bag for storage when not in use

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

These piston kits ease the repair process by saving time and money. They come with everything needed to replace your piston, top-end gaskets, and wrist pin bearing (for two strokes) when the time comes.

Features:

• Included are the piston, rings, wrist pin, circlips, top end gaskets, and even wrist pin bearing (for two-stroke applications).
• Four-stroke kits include a free camchain.
• Case-hardened and highly wear-resistant wrist pins have anti-galling properties.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

VERTEX TOP END ENGINE REBUILD KIT

Easing the repair process by saving time and money Vertex Pistons Top-End Piston Kits come with everything needed to replace your piston, top-end gaskets, and wrist pin bearing (for two-strokes) when the time comes. Included are the piston, rings, wrist pin, circlips, top end gaskets, and even wrist pin bearing (for two-stroke applications). Four-stroke kits include a free Camchain!

VERTEX Piston Features

Manufactured in Italy,Vertex, the premier brand of OEM replacement pistons, is the OEM supplier to KTM and numerous European motorcycle and go-kart manufacturers. Vertex offers enthusiasts state-of-the-art, high-quality pistons for nearly any powersport use from motorcycles and ATVs to marine and karting. Manufactured to the highest standards in Japan, Vertex’s piston rings are produced by the OEM suppliers so that they are direct OEM replacements. Vertex is the choice of those who truly seek the optimum in powersport performance in any application.

VERTEX Wrist Pin Features

Case hardened wrist pins are used with all Vertex pistons.Nitride coated pins are normally used for high performance four-stroke engines utilizing a bronze bushing or with engines using a steel connecting rod without bearings. This hardened surface is highly wear resistant and provides anti-galling properties. Nitriding is a highly specialized surface treatment that produces a highly wear resistant surface. The significant advantage of nitriding is that the surface hardness is developed without quenching and the attendant distortion problems with case hardening. Finishing operations can be eliminated or held to a minimum.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque
• Pleated media provides a large filtration area, offering long service intervals
• Multiple layers of woven cotton gauze media offer excellent filtration
• Application-specific base seal and sealing bead
• Made in the USA for over 40 years
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filte r Material: Cotton Gauze
• Washable: Yes
• Height: 92mm
• Base Outside Length: 127mm
• Base Outside Width: 102mm
• Top Outside Length: 89mm
• Top Outside Width: 89mm
• Filter Re-Oiling Amount: 13ml

A universal super thin vinyl tank pad that protects your paintwork against accidental knocks or rubbing, such as may be caused by clothing, buckles, luggage systems or pillions.

Features:

• Super-thin tank pads designed to protect your paintwork whilst looking good.
• Universal shape to fit most bikes, but can be cut down in size.
• Weather resistant.

This kit provides two chain adjusters, three wheel nut sockets and three front axle alignment tools. The chain adjuster helps you to turn the eccentric hub that tightens the chain, with a corrosion resistant 304 stainless steel construction. The front axle alignment tool helps you to install and maintain correct alignment of the front axle while the axle nut is being tightened with a lightweight corrosion resistant 6061-T6 aluminium construction. The 427-02 tool has a pin that is longer than another, the longer pin must be aligned to engage with the notch in the right-hand fork leg.

427-01 fits models that use a 30mm ID axle
427-02 fits models that use a 25mm ID axle
427-03 fits all Ducatis with Ohlins forks and a 25mm ID axle

Front and Rear Wheel Nut Socket:
408-01-01 has two sizes in one a 55mm 12pt for the rear and a 28mm 6pt for the front wheel
408-02 is a 46mm 6/12pt for the rear wheel
408-03 is a 41mm 6/12pt for the rear wheel

All sockets have a 1/2" socket drive and are constructed from 7075-T6 aluminium with black anodising.

A standard bulb from Whites' comprehensive range of electrical bulbs.

Includes:

• 6v
• 12v
• Instrument
• Capless
• Flasher
• Stop-tail
• Pre-focus
• Halogen headlamp.