New Arrivals

Chain slider bushings for KTM, Husqvarna, and other European models.

Made in California, USA.

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

High-quality replacement ensures reliable performance and durability while meeting or exceeding OEM standards.

Features:

• Built to handle increased power loads.
• Direct OEM replacement with stock mounting locations.
• Made to match OEM specifications and appearance.
• Fully factory tested to ensure performance.

Chrome Boots effortlessly combine style and functionality, ideal for urban and week end riding. Crafted from premium suede with intricate perforations, offering maximum comfort and breathability.

Features:

• Flexible rubber sole.
• Perforated leather for enhanced ventilation.
• Side zipper for easy wear.
• Reflective strips for enhanced night-riding safety.
• Pull tab at the back for easy wearing.
• Reinforced toe, ankle, and heel.

Materials and Fabrics:

• Outer shell: Split suede
• Lining: Mesh lining
• Outsole: Rubber outsole

Certifications:

• EN 13634:2017

MTX Power's high-performance AGM battery boasts an "install and go" design. The use of the latest developed absorbed glass mat (AGM) material significantly improves the CCA and life-cycle of the battery. The new straight-through welding technology effectively reduces the internal resistance, so the battery outputs much higher cranking power.

Features:

• Effectively reduces internal resistance and outputs higher power.
• Full welding joints for durability and resistance against vibration.
• 4 pieces/carton

Specifications:

• CCA: 200cca
• Capacity: 14Ah(C10)
• Dimensions: 135x90x168

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

Produced in the USA with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

NOTE: This set contains all components pictured.

High-quality replacement for your OEM Throttle Cable. Features a black PVC outer jacket for maximum flexibility and durability, steel inner casing that is tightly coiled for low compression, pre-lubricated nylon inner sleeve, bird-caged wire ends, EPDM moulded rubber for high UV resistance and injection moulded components manufactured from high-strength POM material.

Features:

• Flexible and durable with steel inner casing that is tightly coiled for low compression.
• Pre-lubricated nylon inner sleeve.
• Bird caged wire ends.
• EPDM moulded rubber for high UV resistance and injection-moulded components made from high-strength POM material.

Note: Kit contents may vary by fitment and are subject to change.

Fuji-lock hex nuts are made from zinc-plated steel. Sold in bags of 10. Made in California, USA.

Whites Spoke Kits are crafted for riders who want high quality at an affordable price. Constructed from durable high-carbon steel, these spokes are paired with OE-type square steel nipples, delivering both cost-effectiveness and the trusted performance that Whites is known for.

Features:

• Steel OE-type nipples.
• Fitments available to suit most popular late model off-road motorcycles.
• Economically priced.
• Excellent value and performance,
• Compatible with OEM hubs and rims
• Supplied with OEM size (7mm) spoke nipples*

Note:

• *Oversize 8mm spoke nipple sets are available for separate purchase if required.
• If you are lacing an aftermarket rim to your hub assembly, please check the aftermarket rim's spoke nipple hole size. Many aftermarket rims require a larger (8mm) spoke nipple size.
• Whites recommends wheel building is performed by a suitably qualified professional.

Ready-to-install, direct bolt-on cylinder. Requires no re-plating and looks virtually identical to the OEM cylinders.

Specifications:

• Cylinder Diameter: 95 mm
• Cylinder Kit Type: Standard Bore
• Displacement: 450 cc
• Engine Type: 4-Cycle

The intercom that simplifies every communication on the road. Simpler. Smarter. More connected.

With the new BTR1 ADVANCED X, your riding experience shifts into a higher gear. We've redesigned the interface to make it even more intuitive: no modes to select, no complications.

• 1 click to manage phone functions
• 2 clicks to activate the intercom

Everything is at your fingertips — even with gloves.

In conference mode, it allows communication between 4 motorcyclists starting from a distance of 1,200 meters. An advanced technology that makes the BTR1 ADVANCED X the best intercom in its category in terms of price/quality.

ITALIAN DESIGN

The BTR1 ADVANCED X shares the design and control ergonomics with the top-of-the-range RUSH RCF model. The complete design of the MIDLAND intercom line is strictly Made in Italy.

DIGITAL NOISE KILLER

Equipped with a digital filter that reduces wind and engine noise by up to 80%. It allows for clean and clear communication in any weather condition.

COMPATIBILITY AND LONG-LASTING BATTERY

The new intercom offers a “weekend” duration of operation, up to 23 hours of autonomy. Compatible with other brands, smartphones, GPS devices, and TFT systems from major motorcycle manufacturers (BMW, KTM, Ducati, etc.).

HIGH DEFINITION SOUND BY RC

BTR1 ADVANCED X delivers premium audio quality through a dedicated system designed by RCF, an Italian company founded in 1949, one of the world leaders in the production of professional audio systems.

EAR CUSHIONS

Memory foam core and protein leather coating improve sound performance and low-frequency perception.

Main Features:

• One-to-one intercom: 4 people
• BT conference: 4 people
• Max distance: 1,200 m
• Universal intercom connection
• DNK™: Digital Noise Killer
• FM stereo radio with RDS
• Music sharing with passenger
• Connect 2 mobile phones / GPS
• Waterproof IPX6
• HiFi Super Bass Sound speakers
• Automatic Gain Control (AGC)
• Long-life Li-ion battery (over 23 hours talk time)
• Firmware update via PC (USB)
• TFT system compatibility

What's in the Box:

• 2 × BTR1 ADVANCED X devices
• 2 × Slide mounting kits with RCF speakers
• 2 × Headset microphones + 1 wired microphone
• 2 × Double-sided adhesive mounting systems
• 2 × USB Type-C charging kits

Technical Features:

• Simplified conference: Yes
• Simplified interface: Yes
• Stereo: Yes
• VOX (voice activation): Yes
• Web radio with app: Yes
• Intercom conference: Up to 4 people
• Intercom one-to-one: Up to 4 people
• Intercom distance: 1200 m
• Talk to all: Yes
• FM radio: Yes
• Waterproof: IPX6
• Dual mobile connections: Yes
• Bluetooth: Yes
• GPS in background: Yes
• Automatic gain control: Yes
• Battery life: Over 23 hours (conversation)
• Vocal announcements: Yes
• Dimensions (H × W × D): 70 × 85 × 25 mm
• Programmable via PC: Yes
• Helmet compatibility: Universal
• Bluetooth connection: Yes

Denali's Essential Lighting Bundle is a vehicle-specific driving light kit that was purpose-built to provide DENALI-level quality and performance at the most economical price point possible. The kit features a pair of our DL4 Driving Lights, our standard powersports harness, and a vehicle-specific upper light mount to position the lights in the ideal location and make installation a breeze.

The included single-intensity harness provides a simple on/off function via our waterproof push-button switch, but can easily be upgraded to dual intensity functionality by adding our modular DataDim Controller. If adding the dual intensity module, your lights will switch between half and full intensity with your vehicle's high beam switch.

Bundle Contents:

• (2x) DL4 Driving Light with DataDim Technology
• (1x) Driving Light Mount - Honda Africa Twin 1100 Adventure Sports ES, '20-'23
• (1x) Wiring Harness Kit for Driving Lights - Standard Powersports

Note: Product bundles ship complete in a white box and will only show in stock if all components are available. All bundle components are also available for individual sale.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust, and protects axle from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defense, shielding vulnerable joints and preventing leaks. High performance molybdenum grease reduces heat and friction.

• In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% molybdenum grease.

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel
• Fits YAM WR450F 21-22/ YZ450F 20-22

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel
• Fits YAM WR250F 20-21/ YZ250F 19-22

Vertex valves follow high-end OE specifications, using steel or titanium with a pressurised hardness treatment.

• Follows high-end OE specifications.
• High-quality steel or titanium valves.

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel
• Fits KTM 450SX-F 19-22

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel
• Fits KTM 450SX-F 19-22

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel
• Fits YAM WR450F 21-22/ YZ450F 20-22

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Heigh t: 2.375in (60mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Width: 6.875in (175mm)
• Length: 9.188in (233mm)
• Filter Re-Oiling Amount: 0.31oz (9ml)

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Replacement peak for LS2 Coz Hyde helmets.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

This K&N racing air filter has just two layers of cotton to provide even lower air restriction than our replacement air filter for street vehicles. Unlike K&N replacement air filters, fuel management modifications will be necessary with this racing filter. K&N racing air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Designed for racing and track applications.
• Washable and reusable air filter.
• Low restriction.

Specifications:

Heigh 1.313in (33mm)
• Washable: Yes
• Filter Material: Cotton Gauze
• Weight: 1.1 lb (0.5kg)
• Filter Re-Oiling Amount: 0.32oz (9ml)