New Arrivals

Replacement speed sensor for the inverted forks fitted with the Trail Tech Vapor/Vector.

The Whites Damper Rod Fork Tool is the perfect tool for assembling and disassembling most 41, 43, 46 and 47mm Kayaba and Showa inverted forks. Dual-sided with one side designed for Kayaba and the other for Showa forks. Constructed from hardened steel for strength and durability with a black oxide finish for corrosion resistance.

Compatible with Showa and Kayaba forks
Suitable for most 41, 43, 46 and 47mm inverted forks
Hardened steel construction for strength and durability
Black oxide finish for corrosion resistance
T-handle for easy operation

These HotGrips™ have been designed specifically for 50-250cc scooters and smaller motorcycles which typically have smaller batteries and less powerful charging systems. They're ideal for commuting and city riding and everything is included for easy fitment, including the correct drill bit for the panel-mounted switch.

Key Features:

• Sealed for life
• Rainproof, panel-dash fit switch with two heat settings
• Draws under 3A
• Up to 45°C
• Durable rubber tread absorbs vibrations while providing good levels of grip and can be cut to size
• Unique Oxford tread design
• Removable chrome end caps keep original styling

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

This product has been designed to fit the Yamaha T7 Ténéré 2019-onwards.

This stainless steel kit provides 80mm of adjustment over the stock screen. In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable, and airflow underneath your screen reduces the vacuum effect, creating smoother airflow and reducing turbulence. In the lowered position, the screen sits at the same height as stock.

To adjust the screen, simply loosen the thumb nuts, slide into position, and re-tighten—no tools required.

Featuring a 180-degree lever pivot action, the Whites Folding Brake Levers are a must-have on any dirt bike.

In the unfortunate event of a crash. the lever simply turns back on itself and out of harm's way, preventing breakage of your lever. When you're back up, a high-tension spring returns the lever to its original position and you're ready to rip.

With a sleek silver finish or anodized black, red and blue (model-dependent) that gives an awesome factory look.

Specifications:

• Durable forged and anodized lever arm.
• Lever folds outward to prevent breakage in the event of a crash.
• Lever adapter is ultraprecise CNC machined out of high-grade aluminium for a super-light design.
• High-tension spring keeps the lever in place while riding.
• Constructed with brass bushing for maximum performance with smooth operation.
• Function with style.

A faulty air temperature or pressure sensor can cause rough idling, reduced power, poor fuel economy, and increased emissions. Meanwhile, inaccurate readings can hide overheating issues, light a check engine light or even put your machine in limp mode, all putting your engine at risk of severe damage.

Replacing faulty sensor restores reliable performance monitoring, ensuring your machine runs safely and efficiently under all riding conditions.

In the early 1960s, two motorcycle racers, Ken Johnson and Norm McDonald (K&N) developed a ground-breaking new idea for an air filter. After experimenting with numerous types of filter media, they discovered that an oiled cotton design allowed the filter to not only capture contaminants very efficiently, but also allowed it to be washed and reused, and the original K&N High-Flow Air Filter was born. Five decades later, K&N is still innovating industry-leading filtration technology. In addition to performance air filters, K&N® now manufactures a variety of other protection and performance products, including air intake systems, oil filters & fuel filters, with a reputation for exceptional quality and customer service.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features

• Designed to provide increased horsepower and torque
• Pleated media provides a large filtration area offering long service intervals
• Multiple layers of woven cotton gauze media offer excellent filtration
• Application-specific base seal and sealing bead
• Made in the USA for over 40 years
• Washable & reusable, pre-oiled and ready to ride!

Specifications

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 29mm
• Outside Length: 337mm
• Outside Width: 152mm
• Filter Re-Oiling Amount: 27ml

Simply suction this mount to the windshield or any smooth, flat surface1 and use your compatible device while navigating. Kit includes mount with an integrated speaker and a suction cup for easy installation. Your device will charge when mounted.

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

One kit does it all! All of the bearings, seals, shafts*, bushings, and thrust bearings (if required) in one all-inclusive kit to do the job correctly and completely.

• All bearing shafts manufactured with 52100 bearing steel that is hardened and centerless ground for a precision fit and extended wear life.
• Steel spacers are case-hardened and plated for resistance to wear and corrosion.
• No more hunting around for missing pieces costing you time and extra money.
• Needle thrust bearings have been replaced with Teflon bearings. Designed to live longer in water and dirt.

* Not included in all kits.

Note: A limited number of kits only available with bearings and seals.

A Cylinder Works replacement cylinder is a completely new, not remanufactured, cast aluminium nickel silicon carbide (NSC) electroplated stock bore cylinder that appears just like an OE cylinder.

NSC is a composite of nickel and silicon carbide, providing an excellent wear-resistant surface with oil retention capabilities.

Cylinders are then diamond honed to the exact bore dimension and proper surface finish to ensure the proper ring seal and oil retention.

Features:

• Cylinder looks just like stock.
• Nickel silicon carbide plated for longer life.
• No machine work needed *
• Replacement cylinder for standard bore only.

* Honda CRF250R and CRF250X may require slight case modification. Kit comes with instructions.

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Note:

• Axle boots are available to suit this axle:
  • Inner: WPAXCVB003
  • Outer: WPAXCVB004
• Please confirm suitability for your year, make, and model prior to purchase.

• Direct OEM replacement fuel line clamp kit
• This ultimate fuel line clamp kit is an absolute necessity for any shop, technician, or DIY mechanic
• Kit contains 4 of each Fuel Star fuel line OEM replica clamps, available in sizes from 7-17mm I.D.
• Each clamp is an exact replica of the major OEM's fuel line clamps and is manufactured to meet or exceed OEM performance, aesthetics, and fit
• 4-packs also available to refill the kit

Proven to perform in the extremes of our local terrain, Whites CV Axles are produced alongside the world's biggest brands in the ATV/UTV market.

Our hard-wearing axles feature oversized outer joints that allow generous levels of swing angle, providing increased suspension travel and strength. The latest CNC manufacturing processes are utilised to allow excellent levels of travel on the inner joints.

The higher strength and longer lasting TPE boots, OTK clamps and moly grease provide the best performance in extreme conditions and extend the life of your axle.

Features:

• Generous levels of swing angle.
• Excellent levels of travel on the inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

NB: Please confirm suitability for your year, make, model prior to purchase.

Kit includes: All required wheel nuts to replace one wheel.
All nuts are case hardened and plated to prevent wear and corrosion.

Engineered, designed, and manufactured to increase grip while reducing heat build-up. Running up to 20 degrees cooler, these belts outlast the OEM belts. The high-strength rubber compound construction and cut taper design provide a more consistent edge and longer belt life.

Features:

• Designed to run up to 20 degrees cooler than OEM belts extending belt life and increasing performance.
• Manufactured with aramid-loaded, high-end rubber compounds that reduce heat buildup and increase grip.
• Engineered with deeper cogs and increased flexibility resulting in efficient cooling.
• Constructed with aramid cords for ultimate strength and flexibility.
• Designed and manufactured with a cut taper, creating a more consistent edge with fewer loose cord fibres.

The Whites A-Arm Kit is designed to replace worn-out rubber bushings while providing additional suspension travel and greater performance. Constructed to meet and exceed OEM specifications and designed as an OEM replacement. The rebuild kits contain all of the bearings, seals, shafts, and other components needed to repair A-arm failure. Each kit is designed to repair one A-arm, two kits are required for a complete installation.

• OEM replacement kit
• Improves performance
• One kit required per A-arm
• Contains components for a complete A-arm rebuild
• Meets and exceeds OEM specifications

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

OEM spacers typically wear out within a year of hard riding. The wheel spacers should be checked and replaced as needed with every bearing service. Water and dirt act as a grinding compound between the seal face and the mating surface of the spacer. Once the grooves are deep enough, the sealing surface is lost, allowing water and dirt to pass through and contaminate the bearing.

Wheel Spacer Kits are designed to restore the proper sealing surface between the wheel seal and spacer, helping protect wheel bearings from premature wear and failure. Manufactured to precise tolerances for a direct replacement fit, All Balls spacers provide a smooth, durable surface for the seal to run against, reducing the risk of contamination and extending bearing life. Ideal for routine maintenance or during wheel bearing replacement, a quality wheel spacer kit ensures reliable wheel performance in harsh riding conditions.

Avoid those annoying knocks and scratches to your tank by using the new Transformer tank pad. Your tank cannot avoid contact with you and your riding gear, without protection damage is inevitable. The modular design allows for a custom fit to almost any tank shape. A matching set of knee pads is also available.

Features:

• Universal modular design.
• Textured grip finish.
• Fits a variety of tank shapes and sizes.
• Pre-cut 3M adhesive material.
• Template included.
• Protects paintwork.
• Matching Knee Grips available: OXOX799
• Size: 205mm (W) x 200mm (H) (lower width 100mm)