New Arrivals

Brand new aftermarket handlebar switch

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Functions:

• Lights: Off / Low / Hi
• Kill Switch: Off / On

Other specifications:

• Number of pins: 8
• Wire Length: 500 mm

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

All Balls Master Cylinder Rebuild Kit

- Kits contain all of the components to re-seal leaking master cylinders.
- Kits contain copper washers, replacement screws where applicable, cup seals, o-rings and replacement piston.

As one of the largest timing belts manufacturers in the world, Dayco offers a variety of timing belt constructions suitable for any application.

Dayc uses the latest materials and a highly engineered, patented timing belt tooth composite construction.

Dayco timing belts also feature a moulded tooth design that runs efficiently and quieter. Dayco’s premium, high-modulus glass fibre cord delivers precise length stability to keep the engine running smoothly over the life of the belt.

Features:

• Made with high-quality materials that ensure reliability and longevity. It undergoes rigorous testing and quality control to meet the OE standards.
• Designed to fit perfectly with the engine components.
• Made of high- quality rubber, in some cases reinforced with fibres. The presence of synthetic fabrics gives tooth resistance. High modulus cord avoids belt length elongation.
• Can operate at high temperatures of up to 150°C, thanks to a specific hydrogenated nitrile butadiene rubber (HNBR) compound.

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

Upgrades rubber bushings found in Utility ATV A-Arms to ABs redesigned HD Delrin bushings. Designed to replace worn-out rubber bushings and provide greater suspension travel and performance.

Replacement peak for LS2 Coz Hyde helmets.

Brand new aftermarket handlebar switch

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

Functions:

• Lights: Bottom / Off, Middle / Low, Top / High
• Kill Switch: Left / Off, Right / On

Other specifications:

• Number of wires: 7
• Number of pins: 7
• Wire Length: 540 mm

K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters trap harmful contaminants while the filter's construction allows for high oil flow rates.

Features:

• High-performance design for outstanding filtration.
• High-efficiency media with uniform pleats.
• Oil filter design provides for a high rate of oil flow.
• Ideal for high-end synthetic motor oil.

Specifications:

• Style: Cartridge
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Height: 56mm
• Outside Diameter: 55mm
• Inside Diameter: 14mm

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

NOTE: This Vertex Oil Seal Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include all oil seals necessary to rebuild the engine and transmission including crankshaft, output shaft, water pump, clutch, and shifter seals.

WMP Shock Absorbers offer a reliable upgrade over standard OEM options featuring pressed-in NBR bushings for superior durability. Unlike typical polyurethane bushings which are prone to premature wear and failure NBR bushings provide long-lasting performance and resilience under pressure.

Features:

• Heavy-duty construction.
• Comes standard with 10% stiffer springs for improved handling and load support.
• Allows you to upgrade from oil to gas shocks for enhanced ride control where applicable.
• Preload adjustable and ready to mount straight out of the box.

Specifications:

• Top Hole I.D. (mm): 10
• Top Eyelet Width (mm): 30
• Bottom Hole I.D. (mm): 10
• Bottom Eyelet Width (mm): 35.5
• Tube O.D. (mm): 50.8
• Centre to Centre (mm): 417

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

Brake shoes 

Premier PH Series Brake Pad - SINTERED STREET BIKE PADS

These long-lasting pads have a HH friction rating and are TUV tested and ECE R90 type approved. Long-lasting and work well in either wet or dry riding. Street Sport "Sintered" High-performance HH friction rated sintered metal pads made in the USA to an exclusive Premier formulation. The "PH" brake pads offer maximum durability and unbeatable performance under heavy braking and high-speed use.

For off-road use select the "PR" range for MX and ATV applications.

Note: One set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

The Trail Tech Universal Fan Kit is the perfect solution for keeping your engine cool and operating at peak performance. Here are some of the reasons why you should consider this product:

Specifications:

• Increase Cooling Capability over Stock with this Fan Kit
• Programmable Controller to Activate Fan Kit at a Specific Temperature
• Minimal 30-Watt Draw
• Perfect for DIY Radiator Installs
• Temperature Range: -40°C/°F to 300°C/575°F
• LCD Screen: 24x14mm (0.9x0.5in)

Features:

• Easy Installation and Operation: The Trail Tech TTO Temperature Switching Fan Kit is designed to be user-friendly, making it easy to install and operate.
• Monitors Cooling System Performance: Kit includes a temperature sensor that monitors your cooling system, automatically activating the fan when temperatures meet or exceed your desired temperature setting.
• High-Performance SPAL Fan: Trail Tech kits are equipped with premium SPAL Fans that can attach to most radiators using a tried-and-true mounting method ensuring a secure fit.
• Perfect for DIY Radiator Installs: When installing a new radiator in your bike, the Trail Tech Universal Fan Kit is a must-have accessory.
• Easy-to-Read LCD Display: The included easy-to- read LCD display lets you view all gauge readings regardless of viewing angle or lighting conditions. The display is ultra-thin and surface-mountable, making it easy to install.
• Programmable Controller: The Trail Tech Universal Fan Kit comes with a programmable controller that activates the fan at whatever temperature you specify. After setting the cut-in temperature, the controller will take care of the rest.
• Wide Temperature Range: The kit can operate in temperatures ranging from -40°C to 300°C (-40°F to 575°F), making it suitable for use in nearly any environment.

What's Included:

• Cooling Fan
• TTO Digital Gauge
• Radiator Temperature Sensor
• Fan Wire Harness (from TTO to Fan)
• Temp Sensor Extension
• Threaded Rods, Washers and Nuts for Mounting
• Zip Ties
• Thermal Grease

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Replacement grip in sleek black, designed specifically for your Pro Adventure HotGrips®. Need to switch out that grip? This one's got you covered, ensuring your HotGrips® are ready to tackle any adventure that comes your way.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.