Whites

The ideal tool when setting valves with shim type adjustment. The Whites Valve Shim Tool compresses the valve shim bucket for easy removal of the valve adjustment shim, allowing you to adjust the valve clearance on your ride. Hardened alloy steel construction for exceptional strength and durability.

For adjusting valve clearance on twim-cam models
Holds valve spring bucket down so adjusting shims can be removed
Constructed of hardened alloy steel

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites On/Off Switch Block is a two-stage on/off handlebar switch for your engine or headlight. The switch block is pre-wired in a 400mm length with a plug and bullet terminals. Constructed with an aluminium clamp for a secure hold on your handlebars without causing damage to the surface of the handlebar and is compatible with any 12V DC system.

Features:

• Plastic housing half wrap-around design.
• Compatible with 7/8" handlebars.
• Two-stage on/off switch block.
• Aluminium clamp.
• Working voltage: DC12V/10A
• Fully waterproof.
• Flip buttons make it easy for gloved hands to use.
• Width: 22mm
• Height: 46mm
• Depth: 48mm

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. They offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap-side radiators will include a new radiator cap.

Exceptional cooling and maximum flow efficiency to ensure your machine's top performance.

Features:

• Utilizes stock mounting hardware (not included) for a great fit.
• Hand-welded aluminium design for a great look and functionality.
• Includes a new radiator cap.

An extra-wide 57mm body improves comfort and control of your bike, while the open design reduces mud build-up. You can be assured that you will remain planted on the bike under the heaviest of braking and in the muddiest of conditions.

• Meets and exceed OEM quality
• OEM look in an extra-wide design
• Open design improves mud clearance

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Direct OEM replacement cast levers
Designed to exceed OEM specifications
Built to resist breakage
Designed to fit OEM master cylinder
Made from die-cast aluminum for maximum durability and affordability

Whites Combo Tyre Levers are the perfect addition to your trackside toolbox, enabling quick & easy tyre changing. A 32mm spanner end is used to loosen the axle nut for removal of the wheel while the spoon-type tyre lever end allows quick & easy tyre changing.

• Tyre spoon end makes for easy tyre changing
• 32mm spanner end for quick & easy axle removal
• 240mm forged alloy lever
• Lightweight for easy toolbox transportation

Extend the life of your fork seals and reduce stress on your fork springs with the Whites Fork Seal Savers. The seal saver prevents over compression of your front end by bridging the gap between your tyre and front mudguard, designed with a curved bottom to prevent damage to your tyre and tube and also gives a firmer hold for your tie downs. The seal savers also stop your forks compressing further while in travel, which can cause your tie downs to pop off and your beloved ride toppling over.

Curved mount matches tyre to prevent denting into the tyre and damaging your tube, tyre and rim
Prevents premature damage to your fork springs and seals from continuous compression
Stabilises bike and prevents tie downs popping off when on bumpy roads
Raised top reduces surface contact preventing damage to front mudguard
Crossbar holds seal saver in place when loading your ride
Plastic construction is lightweight and durable for easy transportation and extended life

Dimensions (mm): 293 x 231 x 98
Colour: Black

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

If you've broken your mirrors, don't worry. We've got you covered with our range of OEM-style Whites Mirrors. The right-specific mirror offers an affordable solution when only one mirror needs replacing. Designed to meet or exceed OEM specifications, Whites Mirrors provide a high-quality, cost-effective alternative to your original mirrors. Available for most makes and models, we recommend using our fitment search to find the perfect mirror for your bike.

Features:

• OEM replacement part.
• OEM-styled.
• Competitive pricing.
• Right mirror only.

Nikko 12V Horn. Suitable for 12V motorcycles and scooters.

• Universal mounting bracket to fit most motorcycles and scooters.
• Powder-coated for long-term corrosion resistance.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. They offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap-side radiators will include a new radiator cap.

Exceptional cooling and maximum flow efficiency to ensure your machine's top performance.

Features:

• Utilizes stock mounting hardware (not included) for a great fit.
• Hand-welded aluminium design for a great look and functionality.
• Includes a new radiator cap.

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Whites Heated Grips are available in different spec versions to suit a range of motorcycle applications including sport, touring, cruiser, adventure, and ATV.

Their best feature? The integrated heat control switch with 5 levels of heat adjustment, allowing on-the-fly temperature selection without the rider removing their hand from the handlebars and controls.

Features:

• Multicolour LED to indicate the current selected heat setting.
• 5 levels of heating to suit all climate conditions.
• Integrated heat control switch retains OEM look with no extra control panel to install anywhere on the motorcycle.
• Plug and Play wiring connection with in-line fuse for electrical circuit protection.
• Low battery voltage protection feature which will shut off heated grips to avoid battery drain.
• Whites Motorcycle parts 12-month conditional replacement warranty.

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Trusted by riders and dealers in the automotive market, the Whites CV Axle proves its durability against the industry's top manufacturers. With oversized outer joints accommodating up to a 45° swing angle, it enhances suspension travel and robustness. Through the latest CNC manufacturing technologies, the inner joints allow up to 45° of movement. Enhanced by high-strength TPE boots, OTK clamps, and moly grease, it delivers optimal performance in harsh conditions, significantly extending axle lifespan.

• Up to 45° swing angle.
• Up to 45° travel on inner joints.
• Best quality OTK clamps.
• Longer lasting, higher strength TPE boots.
• Moly grease for reliable performance.

Please refer to our online fitment guide for regular additions to the range and specific fit for your model.

Whites OEM replacement air filters are manufactured to meet or exceed OEM specifications. Constructed to fit the factory air box and are direct replacements to OEM air filters. The premium filtering media prevents dirt and dust entering your engine while maintaining excellent air flow. Whites Air Filters are designed for high-performance engines requiring great airflow and filtration.

Features:

• OEM replacement air filter.
• Meets or exceeds OEM specifications.
• Fits factory air box.
• Excellent airflow.
• Premium filtration.

Whites Gear Levers are manufactured from high-quality forged alloy, improving strength and durability. Featuring a spring-loaded black knurled tip reducing the risk of damage while giving additional grip.

Features:

• OEM replacement forged alloy gear shift lever.
• Sprung loaded tip to reduce the chance of damage during a crash.
• Tougher than stock and much more affordable.

The Whites Crankcase Separator Tool fits most 2 and 4-stroke engines with vertically split cases. It allows a multitude of bolt patterns to be used and eliminates binding under heavy loads. The kit includes both 6mm and 8mm mounting bolts and the crankcase separator centre bolt with a 24mm hex head for use with torque wrenches and socket sets. The Whites Crankcase Separator Tool is perfect for splitting cases with ease while preventing unnecessary damage.

Slides in fingers allow multiple patterns for almost all models
Includes both 6mm and 8mm mounting bolts
Both 6mm and 8mm bolts are 200mm long
24mm hex head centre bolt

The Whites Belt Tension Gauge can be used to adjust belt tension on most motorcycles equipped with a secondary drive belt, the gauge provides a simple way to confirm the belt for proper tension. Correctly tensioned and aligned belts prevent premature wear on the whole of the drive chain. Ideal for use after a belt replacement or wheel servicing, constructed with a 1" to 3.5" scale for quick and easy measurement.

Easy to use and read
The gauge allows for accurate belt tension to be set
Use after belt replacement/adjustment or wheel service
Use on secondary drive belts with 10 pounds specification
1" to 3.5" scale

Directions For Use:
1. Position the small O-ring over the 10 lb. mark.
2. Position the U-shaped belt cradle against the bottom of the belt at a 90-degree angle and locate the large O-ring to a reference point, record reading.
3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, the difference in the reading is the belt deflection (refer to service manual for specification).

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD156R FOR PAIR SEE WPRAD156P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD120R FOR PAIR SEE WPRAD120P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD020R FOR PAIR SEE WPRAD020P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

PAIR

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

- Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machines top performance
- Utilizes stock mounting hardware (not included) for a great fit
- Hand-welded aluminium design for a great look and functionality
- Includes a new radiator cap

These fork seal kits are manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual sealing lips guarantee oil stays in and dirt stays out.