Whites

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

TRX450 07-14 Front Left-hand

Off-road adventures demand rugged reliability, and our ATV Steering Knuckle is designed to withstand the harshest terrains while providing you with precise control. When you're ready to conquer the great outdoors, trust in a steering knuckle that keeps you in command.

Features:

• Built Tough for Off-Road Dominance: Crafted from high-strength materials, Whites ATV Steering Knuckle is engineered to handle the toughest challenges nature can throw your way.
• Trail-Tested Durability: Off-roading can be punishing on your vehicle, but our steering knuckle is up to the challenge.
• Precision Control: Our steering knuckle ensures your vehicle responds with accuracy to your every command, giving you the confidence to take on any terrain with ease.

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Perfect for those quick and easy to access nuts and bolts. No more slow operation with conventional spanners or having to constantly swap sockets, you'll never want to return to those old spanners. The perfect tool to have in the workshop, garage or at the track.

Constructed from high-quality chrome vanadium steel
Faster and easier than spanners
Great in the workshop, garage or at the track
Size: 12mm

A faulty air temperature or pressure sensor can cause rough idling, reduced power, poor fuel economy, and increased emissions. Meanwhile, inaccurate readings can hide overheating issues, light a check engine light or even put your machine in limp mode, all putting your engine at risk of severe damage.

Replacing faulty sensor restores reliable performance monitoring, ensuring your machine runs safely and efficiently under all riding conditions.

Includes all gaskets and o-rings necessary to complete a crank (bottom end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set is your one-stop shop for engine rebuilds.

• Designed for OEM replacement
• Made from high-quality materials
• Meet or exceed OEM specifications
• Competitive pricing

An ideal tool for removing those soft alloy fork tube top caps without damage, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

For removing front fork cap
Made of durable steel
Prevents damage to aluminium fork caps
Size: 17mm

The Whites Clutch Fibre Kit is the easiest and best replacement for your clutch. The kit has complete compatibility with your OEM clutch components. The Whites Clutch Fibre Kit comes as a complete set made from quality friction and base materials that maintain your OEM stack height to ensure minimal slippage, great power transfer, an excellent clutch feel, and hours of proper clutch operation.

Features:

• Made to OEM specifications to offer maximum performance and durability.
• Complete set of fibre friction plates.
• Set of replacement friction plates for your motorcycle or ATV.
• Reduces slip, fade, and poor lever feel.

Note: Actual kit pictured.

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

Maximise your motorcycles engine cleaning system with Whites Magnetic Oil Drain Plugs, available for almost every make & model of motorcycle these anodised aluminium plugs include a magnetic core that is designed to catch any metal shavings in your motorcycles oil. Extra protection can't hurt, a simple inexpensive magnetic sump plug could prevent a costly engine rebuild or prevent permanent damage to your engine.

• Thread Size: M14 x 14mm
• Thread Pitch: 1.5mm
• Colour: Blue
• Pre-drilled hole in the head for use with safety wire
• Aluminium crush washer prevent leaks
• Anodised aluminium for a great look and durability

NOTE: All Aluminium Magnetic Drain Plugs should be tightened to the OEM specifications found in your owners/service manual.

The Whites Universal Cooling Fan provides an economical solution to motorcycle cooling. The compact and universal design allows the fan to be fitted to almost anything via hard-wiring for constant operation or rigged through a switch for further control. Only the fan is included to enable an excellent price and universal fitment.

Features:

• Universal cooling fan.
• Virtually limitless applications.
• Can be installed/wired as desired.
• Diameter: 104mm
• Thickness: 60mm

WHITES REPLACEMENT BRAKE SHOES

• OE quality replacement brake shoes
• Edge trimmed and radius ground to ensure these brake shoes fit exactly into the drum
• Linings are bonded and chamfered on the ends
• Made from high-pressure die-cast aluminium

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Specifications:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM master cylinder.
• Made from die-cast aluminium for maximum durability and affordability.
• Constructed with brass bushing for maximum performance with smooth operation.

Built to outlast and outperform OEM seals, the Whites Fork Seals are a high-quality and cost-effective alternative to OEM replacement parts. Constructed with a dual-lip design that reduces friction and ensures better sealing, improving the life of the seal. Manufactured to strict factory specifications and sold in pairs for both the left and right fork.

Whites Fork Seals are high-quality OEM replacements
Dual-lip design reduces friction and ensures better sealing
Manufactured to factory specifications
Sold in pairs

Size: 33X46X10.5
Part Number: 33-129-04

The Whites Fork Boots are constructed from a durable rubber material and designed to prevent mud and dirt buildup on the forks protecting them from unnecessary damage. The perfect replacement to damaged OEM fork boots or forks without existing fork boots. All mounting hardware is included for a quick and hassle-free installation.

Can be stretched to fit bigger forks
Thick durable rubber construction
Protects forks from scratches and damage
Top Diameter: 30mm
Bottom Diameter: 60mm
Length: 245mm

Designed to meet or exceed OEM specifications, the Whites wheel bearing kit includes all components required to completely rebuild your wheel bearing.

Features:

• Premium high-speed bearings.
• Low drag.
• Double lip seals on both sides provide superior exclusion of water and dirt.
• Improved grease retention.

The Whites Independent Rear Suspension A-Arm Kit is designed to replace worn-out rubber bushings while providing additional suspension travel and greater performance. Constructed to meet and exceed OEM specifications and designed as an OEM replacement. The rebuild kits contain all of the bearings, seals, shafts and other components to repair A-arm failure. Each kit is designed to repair one A-arm, two kits are required for a complete installation.

Features:

• OEM replacement kit.
• Improves performance.
• One kit required per A-arm.
• Contains components for complete A-arm rebuild.
• Meets and exceeds OEM specifications.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites A-Arm Kit is designed to replace worn out rubber bushings while providing additional suspension travel and greater performance. Constructed to meet and exceed OEM specifications and designed as an OEM replacement. The rebuild kits contain all of the bearings, seals, shafts and other components to repair A-arm failure. Each kit is designed to repair one A-arm, two kits are required for a complete installation.

OEM replacement kit
Improves performance
One kit required per A-arm
Contains components for complete A-arm rebuild
Meets and exceeds OEM specifications

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

Includes all gaskets and o-rings necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

If you've broken your mirrors, don't worry. We've got you covered with our range of OEM-style Whites Mirrors. The right-specific mirror offers an affordable solution when only one mirror needs replacing. Designed to meet or exceed OEM specifications, Whites Mirrors provide a high-quality, cost-effective alternative to your original mirrors. Available for most makes and models, we recommend using our fitment search to find the perfect mirror for your bike.

Features:

• OEM replacement part.
• OEM-styled.
• Competitive pricing.
• Right mirror only.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent) and constructed with a brass bushing for maximum performance with smooth operation.

Direct OEM replacement cast levers
Designed to exceed OEM specifications
Built to resist breakage
Designed to fit OEM master cylinder
Made from die-cast aluminum for maximum durability and affordability
Constructed with brass bushing for maximum performance with smooth operation

Capable of holding up to 680ml of fluid and with 4 different percentage markings along with a general millilitre marking for gearbox/engine oil changes. The Whites Oil mixture jug has all your two-stroke percentage mixing requirements sorted, with a removable bottom for steady pouring in use and convenient storage in your toolbox. While the rubber cap prevents oil from leaking when not in use or when you want to pre-measure your oil for the next fuel up.

4 different percentage mixtures
Can hold up to 680ml
All-purpose ml marking included
Percentage marked
Rubber cap
Removable base

Percentage Markings:
2% (50:1) in 2L increments
3% (33:1) in 2L increments
5% (20:1) in 2L increments
8% (16:1) in 1L increments
0-680ml measuring gauge in 5ml increments

Includes all gaskets and o-rings necessary to complete a crank (bottem end) and piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement the Whites Complete Gasket Set if your one stop shop for engine rebuilds.

Designed for OEM replacement
Made from high quality materials
Meet or exceed OEM specifications
Competitive pricing

NOTE: LEFT RADIATOR ONLY, FOR RIGHT SEE WPRAD035R FOR PAIR SEE WPRAD035P.

Whites aluminium radiators make great replacements to your bent, cracked, and damaged radiators. Whites radiators offer exceptional cooling and maximum efficiency to ensure your machine's top performance. Based on the OEM specs, a hand-welded aluminium design offers both a great fit and styling. All cap side radiators will include a new radiator cap.

Add a little extra style and functionality to your motorcycle with Whites quality products.

• Whites radiators offer exceptional cooling and maximum flow efficiency to ensure your machine’s top performance
• Utilizes stock mounting hardware (not included) for a great fit
• Hand welded aluminium design for a great look and functionality
• Includes a new radiator cap

Whites Gear Levers are manufactured from high-quality forged alloy, improving strength and durability. Featuring a spring-loaded black knurled tip reducing the risk of damage while giving additional grip.

Features:

• Black knurled tip for improved gear shifts.
• OEM replacement forged alloy gear shift lever.
• Sprung loaded tip to reduce the chance of damage during a crash.
• Tougher than stock and much more affordable.

A faulty air temperature or pressure sensor can cause rough idling, reduced power, poor fuel economy, and increased emissions. Meanwhile, inaccurate readings can hide overheating issues, light a check engine light or even put your machine in limp mode, all putting your engine at risk of severe damage.

Replacing faulty sensor restores reliable performance monitoring, ensuring your machine runs safely and efficiently under all riding conditions.

The Whites OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of race day disaster. Available in black and OEM silver finish (model dependent).

Features:

• Direct OEM replacement cast levers.
• Designed to exceed OEM specifications.
• Built to resist breakage.
• Designed to fit OEM perch.
• Made from die-cast aluminum for maximum durability and affordability.