All Products

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Dimensions:

• Interior diameter: 53 mm
• Exterior diameter: 115 mm
• Thickness: 14 mm
• Length of wires stator to grommet: 50 mm
• Length of wires grommet to plug: 600 mm
• Length of pickup coil's wire to grommet: 150 mm

Other specifications:

• Number of wires: 5
• Number of plugs: 2
• Number of pins:5

Wire to wire resistance:

• Alternator: Green between each Green = 0.4 ohms +-20%
• Pickup: Black to White = 520 ohms +-20%

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

The Fat Boy Charger is fully automatic and suitable for charging 12-volt bike batteries with capacities between 4Ah and 100Ah. The charger also acts as a maintainer and you can 'connect and forget' as the charger will keep the battery voltage topped up. The Fat Boy is also suitable for charging lithium batteries. There is also protection against short circuits, reverse polarity and thermal overload. Comes with crocodile clips and eyelet connectors. This charger is also wall mountable.

Features:

• Charges 12V Batteries and lithium batteries of 2Ah - 20Ah.
• Charges batteries of 4Ah - 100Ah.
• Trickle charges STD, GEL, AGM batteries of all sizes.
• Can charge WET, GEL, AGM, and lithium batteries.
• Canbus Compatible
• Automatic Charging and maintaining
• Overcharge Protection
• Reverse Polarity Protection (Lead-Acid only)
• Short Circuit Protection (Lead-Acid only)
• Spark-proof (Lead-Acid only)

Specifications:

• Application: 12V AGM, Lead-Acid and Lithium
• Input: Auto-switching 120-240VAC 50/60 Hz
• Input Cable: 6' 18AWG, U.S. SPT-2, EU-H03VV, Aust/NZ-H03VV
• Output: 12VDC 2A
• Max Charge Current: 2A
• Max Voltage: 14.9V (Lead-Acid), 14.6V (Lithium)
• Battery Capacity: 4-100Ah (Lead-Acid), 2-20Ah (Lithium)

The Ace Bikes Bike-a-Side Motorcycle Dolly is the perfect solution for manoeuvring motorcycles with centre stands. Just place your motorcycle centre stand onto the Bike-A-Side motorcycle dolly in the right position and use the convenient handle to raise it up in one easily controlled movement.

Now you can effortlessly move your motorcycle into any position you like. The Bike-A-Side is ideal for manoeuvring your motorcycle in tight places like your garage.

With heavy-duty 65 mm ball bearing wheels, the Bike-A-Side motorcycle mover is perfect for lifting and moving heavy motorcycles up to 450 kg.

Features:

• Easily lift and move your motorcycle.
• Built from lightweight and highly durable materials.
• Light and controlled lifting and lowering with the convenient handle.
• Heavy-duty 4 × 65 mm ball bearing swivel wheels for smooth manoeuvring.
• Built for motorcycles with a centre stand and weighing up to 450 kg.
• High-friction bottom side for easy and safe braking.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

The 2^nd generation HFP-396 is new and revised for 2017 to include pre-soldered connections, two flex hose lengths to cover all 2011-2017 applications, and most importantly now includes a 58psi regulator which Polaris implemented in 2013 to cure the well-known vapour lock problem.

The HFP-396 is the original replacement fuel pump for 2011-2017 Polaris ATVs and UTVs and is the only pump approved by the PRC Forum.  This pump will fully restore the specified 58psi+ fuel pressure as required by Polaris for all 2011+ EFI models. This pump installs directly into the OE Polaris assembly and does not require canister modifications of any kind.  The pump is dimensionally and functionally identical to the OE pump motor, originally manufactured by Bosch for Polaris. 

The installation kit includes several items designed to extend longevity beyond the original pump.  Two ethanol-safe corrugated flex hoses are included, as well as a Viton ethanol-safe fuel pump o-ring, and an ethanol-safe 30-micron polyethylene filter strainer.  With pump gasoline now infused in most parts of the country with as much as 15% ethanol, compatibility with multiple fuel blends is an essential requirement for all fuel pump components-- not only the pump itself. 

Our pump development of the HFP-396 started in 2013, starting with the same proven 30mm design from our HFP-389 pump used in KTM and Husqvarna applications and specifically designed for sustained hot climate operation.  A weak point of the factory Polaris fuel pump motor is its inability to withstand extreme temperatures.  Riders have found themselves on the trail or in the desert unable to restart their machine after only 20-30 mins of continuous run time.  Once the pump has cooled down it will sometimes resume normal operation, eventually requiring replacement.

• OEM or better performance
• Black plated corrosion-resistant case
• Direct drop-in replacement
• Gradient density 30-micron fuel strainer for superior contaminant filtration
• Integrated check valve to ensure fast start-ups

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

Wossner

For more than 35 years, Wössner has been designing and producing high- performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Needle Bearings (Little End Bearings)

Please use our Fitments Tool to ensure the correct part is ordered.

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

All Balls manufactures a wide range of high-quality products to keep you out there on your Motorbike, ATV or UTV. All Balls Sintered Brake Pads are engineered to be extremely durable and dependable, while withstanding high-speed environments.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

KoubaLink specialises in motorcycle lowering and performance linkages for off-road and dual-sport rear suspension systems. Compromise is not an option at KoubaLink. Listening to riders from all over the world explain where and how they use their off-road and dual-sport bikes. With their input, Koubalink manufacture products that add to your motorcycling experience and make it a little more enjoyable.

• Provides better front-end stability by lowering rear suspension geometry
• Machined from billet aluminium
• Stronger than OEM
• Pre-installed OE style bearings included
• Replace linkage like its OEM
• Includes all required bearings and seals for assembly (Excluding Dog Bone styled linkages that do not include bearings and seals from factory)

Kit contains bearings, seals, and o-rings required to rebuild the transaxle.

Features:

• Direct OEM replacement at a fraction of the cost.
• High-quality ABEC 3 precision ball bearings used throughout.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, this differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

Oxford Premium LED Turn Signals are compact, bright and sold with resistors (in case you need to adjust your flash rate).

Features:

• LED array.
• Matte black finish.
• Waterproof.
• Short stem.
• Includes resistors (optional, if needed).
• Sold as a pair.

All Balls Wheel Bearing Kit

Hands down, the most complete line of wheel bearing & seal kits!
All the bearings and seals required to refit a wheel in one convenient package.
Premium high-speed bearings feature low drag, double lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention.
High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications.
Type TC, Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt whilethe rubber coated outside diameter creates an optimum seal at the hub.
Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Wrench Rabbit Rebuild Kits have been rebranded to Vertex Rebuild Kits; all components remain unchanged however you may receive a kit that is boxed differently to the one pictured.

Vertex Complete Engine Rebuild Kits are a simple and cost-effective way to complete a top-to-bottom professional rebuild for your 2 or 4-stroke motorcycle or ATV/UTV. The one easy to order kit will not only save you time by offering a one-stop-shop in a box, but they also save you money when compared to purchasing all items individually.

Vertex kits include quality components from Vertex, Hot Rods & Hot Cams.*

All parts are manufactured in the USA from the highest quality material.

Features:

• Crafted to deliver unbeatable levels of quality
• High-grade materials for exceptional performance
• Superior in durability and reliability
• Kits available for many 2 & 4-stroke motorcycles, ATVs & UTVs
• Cost-effective solution
• Saves time sourcing individual components
• Vertex pistons & gaskets*
• Hot Rods crank & bearing kits*
• Hot Cams cam chain*

Includes:

• Crankshaft
• Piston Kit
• Complete Engine Gasket Kit
• Oil Seal Kit
• Main Bearing and Seal Kit
• Water Pump Rebuild Kit
• Transmission Bearing Kit
• Countershaft Bushing/Seal Kit
• Cam Chain

*Specific parts vary by kit (see included parts above).

Replaces leaky seals and bushings behind countershaft sprockets. Competitively priced against OEM parts. Quick solution to repairing a leaking counter shaft seal in one complete kit.

Includes:

• Hot Rods countershaft seal
• Countershaft bushing
• O-rings
• Sprocket nut washer (where applicable)

Note:

Does not include water pump bearings or transmission bearings.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Quantum replacement fuel pumps, regulators, tank seals and strainers are designed to meet or exceed OEM specifications, and feature upgrades that improve on the OEM design. Upgraded polymers, brushes, and commutators ensure long life and durability in multiple fuel blends.

Features & Benefits

• OEM or better performance
• Polished corrosion-resistant case to help minimize seizing during non-operation
• Specifically designed for quiet operation
• Drop-in replacement
• Gradient density fuel strainer for superior contaminant filtration
• Patented check valve technology
• Compatible with modern ethanol-infused pump gasoline

Combining the bestselling 22mm handlebar mount with a cast aluminium twin- spar pivoting arm, the CLIQR Handlebar Pivot Mount offers our most convenient fit with 360 degrees of rotation.

What's included:

• 1 x Handlebar mount
• 1 x Pivot arm
• 2 x Device adaptors
• 1 x Alcohol wipe

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.