All Products

PR SERIES – Off-Road Sintered

Premier PR pads have been upgraded to a new HIGH DENSITY sintered metal compound suitable for all types of moto-x and ATV use.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Filter Material: Cotton Gauze
• Washable: Yes
• Height: 83mm
• Base Inside Diameter: 137mm
• Base Outside Diameter: 159mm
• Top Outside Diameter: 178mm
• Filter Re-Oiling Amount: 15ml

Please check the Nitromousse Fitment Guide before purchasing!

NitroMousse from Nuetech has put more than a decade of research and development into improving the less-than-desirable aspects of a mousse. In general, mousses are known to be a compromise in performance on some level, but Nitromousse dramatically enhances the positives while greatly reducing the negatives.

Nitromousse combines a high concentration of nitrogen into an incredibly tough micro-matrix of proprietary elastomers. This eliminates the'dead feel' and provides a much more lively, lighter and traction-enhanced feel from the very first ride as they do not need a break-in period. Additionally, its proprietary formula and manufacturing process provide a mousse that will last up to twice as long at a much lower cost.

Features:

• Provides a much more progressive, predictable, and secure feel from the very first ride that will never leave you stuck with a flat!
• Uses an incredibly tough micro-matrix of proprietary elastomers, increasing durability, allowing Nitromousse to last up to 2X longer than other mousses.
• Contains a high concentration of nitrogen, which gives it a much plusher pneumatic (air) feel, eliminating the dreaded dead feel.
• The Nitrogen formula gives the Nitromousse a low-pressure, predictable ride, resisting impacts and increasing bump absorption.
• The Nitromousse compounds allow for a more lively progressive ride, eliminating deflection and providing a lighter feel in motion.
• Does not need a break-in period and has been designed and tested to perform consistently in temperature ranges from 30-100+ degrees.
• Comes at an exceptional price.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

Quality chain roller kit from All Balls Racing. High-performance rollers for replacement of OE chain rollers.

Features:

• Universal 34mm and 38mm polyurethane chain rollers have a 98A Durometer hardness for long life.
• Sealed precision bearings with two additional outer seals to prevent water and dirt from contaminating the bearings.
• Mounts to frame boss are made from hi-performance self lubricating nylon.

Quality replacement Regulator/Rectifiers.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality replacement Ignition Coils.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

The Camshaft Chain Silent Kit is made from high-end materials giving incredible strength and durability, exceeding O.E.M. specifications and tolerances.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance, while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offers excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Washa ble: Yes
• Filter Material: Cotton Gauze
• Height: 57mm
• Inside Diameter: 70mm
• Outside Diameter: 105mm
• Filter Re-Oiling Amount: 10ml

Fuel pump strainers act as a first line of defence against fuel system contamination. Strainers filter out common contaminants found in gasoline such as dirt, dust and other particulate matter, as well as gasoline varnish. Quantum fuel pump strainers feature multiple layers of strainer media to filter progressively smaller particle sizes. The expanded surface area provides enhanced filtration, extending the life of the fuel pump.

Restricted fuel flow through a clogged strainer causes the fuel pump to work harder, reducing pump longevity. Strainer clogging is among the top causes of fuel pump failure making it important to replace your strainer regularly - before problems arise. We recommend replacing fuel pump strainers in powersports applications once a year as part of a preventative maintenance plan.

Features:

• Designed with gradient density to meet or exceed OE specifications.
• Designed to ensure optimal filtration to prevent fuel system contamination.
• Strainer material tested and validated for capacity and efficiency by accredited third party.

Get an incredible 100psi protection at the rim, where you need it, virtually eliminating any chance of damage.

Tubliss employs a dual-pressure chamber system by replacing conventional tubes with a high-pressure, rim-protecting inner bladder acting as a 360-degree rim lock that seals the tyre to the full circumference of the rim.

Tubliss also acts as a 100PSI bumper, providing a protective cushion against rim damage. It also stabilises the tyre closer to the rim so the sidewall stands up instead of flopping over. This allows the tyre to absorb more of the impact forces before they get to the rim.

No tubes means you can fix flats in seconds using tyre plugs. In the event of a large gash or other severe tyre damage, the full circumference rim lock aspect allows for a low-speed run back to civilisation. Running tyre sealant makes the whole system even more effective. After the initial installation, future tyre changes are a cinch because you no longer have to fight with the knuckle-busting inner tube.

Features:

• Break through low-pressure capability.
• Massive traction gains.
• Plusher ride.
• Lighter than heavy-duty tubes.
• No pinch flats.
• 2- minute tyre repairs.
• Superior rim protection.
• Super durable.
• Tyres last longer.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area offering long service intervals.
• Multiple layers of woven cotton gauze media offers excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Washa ble: Yes
• Filter Material: Cotton Gauze
• Height: 21mm
• Outside Length: 194mm
• Outside Width: 135mm
• Filter Re-Oiling Amount: 16ml

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

PV SERIES – Semi-Sintered Pads

New high durability semi-sintered pads that have the brake response of an organic but the durability of a sintered pad. For sport bike use only.

A quality pair of fork oil and dust seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs outside of the seal allow easy installation.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

XAM chain and sprocket kits are the perfect drive maintenance kit for your bike. The perfect alternative to expensive OEM replacements, it is designed to meet and exceed OEM specifications. Supplied in presentable packaging with a carry handle for convenient transportation.

Features:

• Includes strong and durable C49 high-carbon steel sprockets.
• Paired with a high-quality XAM chain.

The Bumper is a high tensile steel self-coiling cable lock. It has a simple push-to-lock mechanism. Also perfect for securing helmets and accessories.

Features:

• Simple push-to-lock mechanism.
• Perfect for securing helmets and accessories.
• Plastic coated to protect paintwork.
• 2 keys.
• 600mm long, 6mm diameter cable.

Quality design and construction of every All Balls piece meets the toughest standards and conditions - from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Available individually in left-hand and right-hand thread or sold in pairs one L/H and one R/H thread.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Stay safer in the backcountry during all your outdoor adventures — motorcycling, snowmobiling, snow biking, backpacking, climbing, mountain biking, and boating — with help just the push of a button away. The super-rugged and secure Tracker Packer holster and mount firmly attach SPOT Gen4 and SPOT Gen3 devices to your pack’s shoulder strap, upper arm, lower leg above the boot, or other locations.

Features:

• Includes a heavy-duty, quick-adjusting hook-and-loop extension strap for mounting on the arm over body armour.
• Includes a redundant tether to secure the device to apparel or a backpack.
• Red label with “SOS”.
• Caselli 66 and GL logos printed on the holster.
• Redundant double hook-and-loop attachment system with tether cord.
• 2″ heavy-duty hook-and-loop band with grippy backing.
• Elastic shock cord retainer loop for Garmin inReach Mini antenna.
• Foam padding to absorb shock and vibration.
• Mil-spec materials and hardware.

Note:

• Wearing the Tracker Packer on your body is the best safety practice.
• Holster only. Device pictured is not included.
• For the new inReach Mini 2, the spine mount adapter must be purchased directly from Garmin. It is not included in the box.

High-quality lower A-Arm bearing and seal kit from All Balls. This kit is designed to replace worn-out rubber bushings and provides greater suspension travel and performance.

Features:

• Kit contains bearings and seals for lower A-Arm.
• Upgrades rubber bushings found in Utility ATV A-Arms to redesigned HD Delrin bushings.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.