HARD PARTS

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom-engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features:

• Designed to provide increased horsepower and torque.
• Pleated media provides a large filtration area, offering long service intervals.
• Multiple layers of woven cotton gauze media offer excellent filtration.
• Application-specific base seal and sealing bead.
• Made in the USA for over 40 years.
• Washable and reusable, pre-oiled and ready to ride!

Specifications:

• Washa ble: Yes
• Filter Material: Cotton Gauze
• Height: 25mm
• Outside Length: 210mm
• Outside Width: 213mm
• Filter Re-Oiling Amount: 9ml

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

NOTE: This complete Vertex Gasket Set contains all parts as pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• One kit containing all of the gaskets, O-rings, and valve seals necessary to rebuild the entire engine and transmission.
• Includes transmission seals.

Quality replacement components to rebuild one fuel tap. Improves service life and resistance to water and dirt.

Includes:

• Face screws
• Face gasket
• Wave washer
• Tank bolts
• Tank gasket
• O-rings

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Trail Tech TTO Temperature Switching Fan Kit monitors your bike's cooling system performance and automatically activates the fan to keep engine at the optimum temperature range.

Specifications:

• Physical Dimensions: of 210 x 120 x 85mm (8.2 x 4.7 x 3.3")
  Note: This will vary by fan kit.
• Weight: 23 oz. (652g)
• Digital Display: Trail Tech TTO Fan Controller
• Screen Size: 23.7x13.6mm (.93x.53in)
• Air Flow: 147 CFM
• Power Requirements: 12V DC only
• Amp Draw: 3 Amps
• Watt Draw: 30 Watts
• NOTE: Please make sure bike has necessary power available.
• On bikes that have a regulated thermostatically controlled harness (this includes all new KTM and Husqvarna EFI 2 strokes) you will need to install an extended wire harness (sold separately) back to the battery and attached the fan kit to that wire harness.

Features:

• High-Quality Construction: The fan itself is top quality, made from durable high-impact plastic with exceptional air flow, the bracket is made from high-quality black coated steel, and the wiring harness is constructed with weather-resistant materials to stand up to even the toughest conditions.
• Easy Installation: Worried that adding a fan to your bike will be a complicated, time-consuming process? With the Trail Tech Fan Kit, you don't have to be. Our model-specific fan kits mount easily to your bike's factory mounting points on the OEM radiator. Plus, it's compatible with Trail Tech Radiator Guards, allowing you to protect your investment from damage while you ride.
• Enhanced Cooling: The fan is designed to provide maximum airflow to your bike's radiator, helping to keep your engine running cooler and more efficiently. This can help prevent overheating and engine damage.
• Automatic Activation: The Trail Tech Fan Kit automatically activates the fan at the temperature that you select to keep your engine at the optimum temperature range for your riding situation. The temperature sensor easily mounts in-between your radiator's cooling fins. You don’t have to splice any coolant lines.
• Wiring Harness: The Trail Tech Fan Kit comes with an included high-quality wiring harness and a low 30-watt power draw. Make sure your bike has the necessary power available to keep your bike running cool on slow, technical trails.
• Model Specific: The Trail Tech Fan Kit is designed to fit with stock radiator, gas tank. The kit contains everything you need for installation, including model-specific instructions. You won't have to worry about cutting fluid lines, as the temperature sensor fits between radiator fins. The provided wiring harness runs to the battery and includes a fuse.
• Enhanced Safety: Overheating can be dangerous, especially when you're far from civilization. When your engine is running at the right temperature, it will perform at its best. Keep your engine cool and avoid difficult riding situations. Enjoy your ride with peace of mind.

Air Cut Off Valve Rebuild Kits

Poor running conditions or popping on deceleration are signs that you may need to rebuild the air cut off valve.

All of the necessary parts to rebuild the air cut off valve circuit are included. Kits for vehicles with multiple carburetors include all components for all carburetors.

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

Plug-and-play replacement stator from RM Stator.

Dimensions:

• Interior diameter: 42 mm
• Exterior diameter: 107 mm
• Thickness: 26 mm
• Length of wires stator to grommet: 105 mm
• Length of wires grommet to plug: 275 mm
• Length of pickup coil's wire to grommet: 75 mm

Other specifications:

• Number of wires: 5
• Number of plugs: 2
• Number of pins: 5
• Number of poles: 18
• Wire to wire resistance:
• Alternator: Between each Yellow = 0.5 ohms +-20%
• Pickup: Blue/Yellow to Green = 232 ohms +-20%

Details:

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connectors included
• Rubber grommet included
• All products shipped are tested

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

A quality master cylinder repair kit from All Balls. Contains everything needed to repair your master cylinder to like new condition.

Offering great grip and performance resulting from their high-quality rubber construction Anlida Tyres are excellent for those wanting new tyres without breaking the bank. The F808 series is manufactured with a medium/soft compound and a wide pattern design which is perfect for clearing soft soil, sand and mud providing excellent grip in softer terrain. With 15 different sizes available we have the perfect Anlida Tyre for your ride, so you can benefit from the optimal grip whether you're racing on the track, smashing the trails or working hard out on the farm.

High-quality rubber
Farm, track or trail applications
Tyre size: 80/100
Rim size: 12"
Series: F808
Application: Junior MX and Trail Rear

All Balls replacement shock bumper, constructed from a stiffer rubber All Balls shock bumpers provide a brilliant fit & better feel when your shock is bottomed out.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

Universal bar end mirrors from Oxford.

Features:

• Fits 22mm diameter handlebars using 12-18mm expansion bushes.
• To be used in conjunction with original-fit mirrors.
• 68mm diameter mirror.

• Direct OEM replacement at a fraction of the cost
• Includes valve, hose, gaskets, screws, clamps and everything needed to replace the OEM petcock
• Viton rubber fuel resistant gaskets
• Includes OE style fuel line and clamps

Up to 40% stronger than OE axles, these complete axles feature enlarged CV joints, bearing cages, and chromoly axle shafts. All internal components are precision ground and utilize molybdenum grease.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• Black oxide coating to resist rust and corrosion.

In the early 1960s, two motorcycle racers, Ken Johnson and Norm McDonald (K&N) developed a ground-breaking new idea for an air filter. After experimenting with numerous types of filter media, they discovered that an oiled cotton design allowed the filter to not only capture contaminants very efficiently, but also allowed it to be washed and reused, and the original K&N High-Flow Air Filter was born. Five decades later, K&N is still innovating industry-leading filtration technology. In addition to performance air filters, K&N® now manufactures a variety of other protection and performance products, including air intake systems, oil filters & fuel filters, with a reputation for exceptional quality and customer service.

K&N's high-flow air filters are available as a replacement for your stock motorcycle air filter element. They are custom engineered to fit your specific application and are designed to provide low restriction and increased performance while providing excellent engine protection for your motorcycle.

Features

• Designed to provide increased horsepower and torque
• Pleated media provides a large filtration area offering long service intervals
• Multiple layers of woven cotton gauze media offer excellent filtration
• Application-specific base seal and sealing bead
• Made in the USA for over 40 years
• Washable & reusable, pre-oiled and ready to ride!

New and Updated AB8 ATV CV/AXLE Shaft. Now improved with stronger 8 Ball design.

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufactured in an ISO facility.
• Assembled with 3% moly grease.
• New Improved and Stronger 8 Ball Joint.

New and updated AB8 ATV CV/Axle Shaft. Now improved with stronger 8 Ball design.

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufacturing in an ISO facility.
• Assembled with 3% moly grease.

New and updated AB8 ATV CV/Axle Shaft. Now improved with stronger 8 Ball design.

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Neoprene boots.
• Engineered in the USA.
• Manufacturing in an ISO facility.
• Assembled with 3% moly grease.

The K&N Drycharger^® is a silicone-treated, polyester wrap that is made to cover K&N Air Filters or Personal Watercraft Flame Arrestors. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron-sized openings that allow high airflow. Yet, due to the Drychargers silicone-treated polyester wrap, the amount of water that reaches the air filter or flame arrestor is limited.

Features:

• This product wraps your air filter with an additional pre-filter.
• Extends service interval of your K&N filter.
• Durable silicone-treated polyester material with stitched elastic openings.
• Water repellent treatment typically lasts 1 to 2 years.

Specifications:

• Mate rial: Silicone Treated Polyester
• Height: 54mm
• Base Inside Diameter: 159mm
• Top Inside Diameter: 140mm