New Arrivals

Trail Techs TTO Temperature Switching Fan Kit monitors your KTM cooling system performance and automatically activates the fan to keep the engine at optimum temperature range.

Specifications:

• Custom adjustment of temperature trigger point.
• No cutting of fluid lines with included fin sensor.
• 30-watt draw
• 4-inch fan
• 12V DC only
• Temperature: (-)40 to 300 Degrees Celsius
• Physical Weight: 652 Grams
• Physical Dimensions: 210 X 120 X 85MM

Contents:

• A Inch SPAL Fan: 7051-FN1
• TTV Temperature Gauge: 732-S00
• Radiator Bracket: 7051-BR06
• Temperature Sensor: 7500-3005
• Wire Harness: 732-WH1

Upgrade your motorcycle's clutch system with the All Balls Racing Motorcycle Clutch Cable. Designed with precision and durability in mind, this clutch cable delivers exceptional performance and reliability on the road.

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird-caged prior to terminal casting for superior pull-out resistance.
• EPDM-moulded rubber components for high UV resistance and long life.
• Injected moulded components are manufactured from high-strength POM material.

P SERIES - Street Bikes

Premier's most successful general use material, our P series pads, are a tough Kevlar based organic material giving superb brake effect on all sportbikes and cruisers. This material is preselected by the catalogue when you order P prefix disc pads.

P SERIES - Off-Road

Part numbers relating to off-road machines are supplied in carbon graphite compound for medium durability, good brake effect and minimum heat generation.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

A quality swing arm repair kit from All Balls Racing contains everything required to rebuild swing arm bearings. Confirm suitability for your year, make, model prior to purchase.

Features:

• Case-hardened and plated to prevent wear and corrosion.
• POM composite washer bearings replace thrust needle washers for superior resistance to water and dirt.
• Shafts are made from 52100 Bearing steel, through hardened and precision ground.
• Needle Bearings are made from 52100 bearing steel and ARC61-65 heat-treated ST13 steel shell.

Kit Contents:

• 1x Ball Bearing
• 4x Seals
• 2x Needle Bearing Shaft
• 2x Needle Bearings
• 1x Bushings

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Quality carburettor rebuild kit from All Balls.

• Kits include all of the necessary components to repair a carburettor. ATV models with two carburettors include components to repair two carburettors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needles and seat. (Needle jet and other pressed-in jets are not included in the kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High-Performance Interface Gasket material.
• Components included in the kits are based on US models and discretion must be used when attempting to install the kit on a non-US model.
• Off-road use only.

The Boss is a super strong disc lock with a 12.7mm shackle.

The Oxford Boss Disc Lock has undergone rigorous independent testing and has been awarded Sold Secure Motorcycle GOLD and is SBSC and FG certified. Insurance discounts are available in the UK when you use this lock.

The lock has a key replacement service so that if you are unfortunate enough to lose all your keys a new one can be made up. Just remember to take note of your key number and keep this in a safe place.

Key Features
• Sold Secure Motorcycle GOLD.
• Double locking shackle mechanism.
• Anti-pick & anti-drill lock cylinder.
• Hardened steel shackle prevents bolt cropping.
• Can also be used in combination with a 12mm square link chain to double security.
• Dust cover to protect the lock barrel from dirt ingress.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, this differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

Designed to keep your differential in top condition, this kit includes high-quality seals that prevent leaks and protect against dirt, water, and debris. Easy to install and compatible with a wide range of ATV and UTV models, this differential seal kit provides a cost-effective solution to prevent costly repairs and downtime. Fit these and have peace of mind.

Features:

• Double lip type TC seals.
• Front or rear position sold separately.

Note: Contains seals only. Verify fitment before purchasing.

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel

Includes components necessary to complete a piston (top end) rebuild. Competitive pricing, made to meet and exceed OEM quality and designed as a direct OEM replacement.

Features:

• Designed for OEM replacement.
• Made from high-quality materials.
• Meet or exceed OEM specifications.
• Competitive pricing.

All the bearings and seal required to refit a wheel in one convenient package.

Features:

• Premium high-speed bearings feature low drag.
• Double lip seals on both sides to provide superior exclusion of water and dirt
• Improved grease retention.

Quality chain roller kit from All Balls Racing. High-performance rollers for replacement of OE chain rollers.

Features:

• Universal 34mm and 38mm polyurethane chain rollers have a 98A Durometer hardness for long life.
• Sealed precision bearings with two additional outer seals to prevent water and dirt from contaminating the bearings.
• Mounts to frame boss are made from hi-performance self lubricating nylon.

A quality pair of fork oil and dust seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs outside of the seal allow easy installation.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs.

• Inner clutch cover gasket
• Designed to fit O.E.M. cover

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation

Dimensions:

• Le ngth: 163 mm
• Width: 60 mm
• Distance between fixation holes: 88 mm

Oxford's Exhaust Heat Shield offers thermal protection by deflecting radiated exhaust heat and guards against you, your clothing or your accessories from accidently touching a hot exhaust system.

The Heat Shield is supplied with adjustable clamps so it can be fitted to a variety of different sized exhaust pipe diameters.

Available in four bespoke designs to suit the style of your bike: Cafe, Street, Sport and Scrambler.

Features:

• Guards against items coming into contact with a hot exhaust.
• Helps to protect your bike's exhaust system from damage.
• Bespoke design enhances the look of your bike.
• Corrosion-resistant stainless steel construction.
• Easy to install: 2 x clamps included.

Includes:

• 45-60cm clamp(s)
• Anti-vibration washers
• M6 screws
• Flat washers

Rough riding calls for stronger axles and that’s where All Balls Racing excels. Machined for exact OEM fit, the shaft is made of chromoly steel with a larger diameter than most axles. The axle has 6 ball bearings in each CV joint. Laminate coating resists corrosion and rust and protects axles from dirt, water, rocks and grease. Waterproof neoprene boots act as a first line of defence, shielding vulnerable joints and preventing leaks. High-performance molybdenum grease reduces heat and friction.

In static torsion trials, these axles were up to 30% stronger than OEM and aftermarket competition.

Features:

• 40% stronger than OEM.
• Larger 4340 chrome-moly steel axle bar.
• Precision ground components.
• Low profile clamps.
• Lasts approximately 50 percent longer than many aftermarket competitors.
• Neoprene boots.
• Typically runs almost 130,000 cycles versus 80,000 cycles for many axles.
• Engineered in the USA.
• Manufactured in an ISO facility.Assembled with 3% molybdenum grease.

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

Features:

• Direct replacement to your original unit.
• Plug-and-play, direct fit, easy installation.
• All products shipped are tested.

Dimensions:

• Width: 40mm
• Length: 32mm
• Height: 52mm
• Wires length: 180 mm and 80mm
• Fixation holes centre to centre: 55mm
• Resistance: 0.5 ohms

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

The Quartz XD6 is a motorcycle and scooter disc lock.

Features:

• Ideal for all modern motorcycles.
• Twin spar lock chassis for double strength and cut resistance.
• Alloy construction with 6mm hardened locking pin.
• Unique design; includes minder cable and attachment eye.

High-quality park hand brake cable from All Balls.

Features:

• Black PVC outer jacket for maximum flexibility and durability.
• Steel inner casing that is tightly coiled for low compression.
• A pre-lubricated nylon inner sleeve guarantees smooth operation and long life.
• All wire ends are bird caged prior to terminal casting for superior pull-out resistance.
• EPDM molded rubber components for high UV resistance and long life.
• Injected molded components are manufactured from high strength POM material.

Quality king pin kit from All Balls Racing. Features steel bushings, needle- bearing shaft and seals. Great value.

Bolt Engine Fastener Kits come with modern dimpled flange bolts. With a bright zinc finish, these fasteners last long and give a clean, updated look to any engine.

Proudly made in the USA.

• Two-Stroke Engine Fastener kits have all the external fasteners from top to bottom-end, including hardware for: reeds, crankcase, case saver, water pump, left case cover, ignition cover, inner and outer clutch covers, power valve covers.
• Four-Stroke Engine Fastener kits include bottom-end hardware for the following: crankcase covers, clutch cover, oil filter cover, crankcase, case saver, water pump and various top-end bolts depending on model.

All Balls now offers a complete fork bush kit solution. The kit includes the following products:

• 2x slider bushings
• 2x leg bushings
• All copper washers and O-rings, 2 fork seal snap rings.

Quality design and construction of every All Balls piece meets the toughest standards and conditions — from daily commuting to full-on racing, all older bearing and seal designs are upgraded to the best and latest specs and designs.

Bolt brand bolts, nuts and washers meet all OEM standards. Designed with precision, each bolt comes in a convenient pack of 10.