Tools

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M38 x 1.5
Thread Direction: Right Hand
Type: Female (Internal Thread)

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M27 x 1.0
Thread Direction: Left Hand
Type: Male (External Thread)

The MotoPressor Dial Tyre Gauge has an easy to read, 40mm dial with both PSI and Kpa graduations up to a maximum of 60PSI and 400Kpa.

This model has a straight stem and will hold the reading when removed from the valve stem, plus it has a bleeder/reset button.

The Whites Wheel Balancer is the ideal tool for both personal garages and professional workshops. Perfect for balancing, lacing, and truing wheels, it offers exceptional value.

Features:

• Centre shaft with wheel-centring cones and four roller bearings to reduce friction for precise balancing.
• Portable stand with adjustable frame rails accommodates wheels up to 12 1/2" wide.
• Durable, rust-resistant coating.
• Adjustable rim pointer for accurate wheel truing.
• Adjustable legs with bubble level for precise alignment.
• Static balancer suitable for all modern motorcycle wheels, front or rear.

Specifications:

• Suited for rims: 10" to 21".
• Adjustable frame rails for wide wheels up to 12 1/2" wide.
• Rod diameter: 12mm.
• Largest cone point: 31mm, made from machined aluminium.
• Mounting options: Adjustable centring cones or rod on ball bearings.
• Four high-quality roller bearings ensure friction-free operation.

The Whites Shock Preload Adjusting Tool is the perfect tool for adjusting your shock preload on motorcycles or ATVs with an 80mm shock spring collar. Eliminate the risk of damaging your shock and collars with a screwdriver and hammer and use this Whites tool made for the job. Constructed from carbon steel for strength and durability ensuring it will last for many shock adjustments to come.

Helps to adjust the preload spring collars without damage
Carbon steel construction
Easily adjusts single shock pre-load rings
Eliminates the hammer and punch method
Size range: 80mm

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M28 x 1.0
Thread Direction: Right Hand
Type: Male (External Thread)

The Whites Sock Compression Adjuster Removal Tool allows easy removal of the rear shock compression adjuster.

Note: The punch marks at the threads must be drilled 1mm deep prior to removal.

Provides a simple way to remove the bearing race on your steering stem. Insert the tool into the stem and open it until it is tight against the stem. From the other end tap the tool out and it will pull the bearing race with it. Suitable for steering head races sized 25-40mm. The hardened steel construction and black oxide coating ensure longevity and corrosion resistance.

Suits races with 25-40mm diameter
Hardened steel construction
Prevents damage to the steering stem
Black oxide coating prevents corrosion

The Whites Dry Charge Battery Filler provides a safe, fast and tidy way to fill dry charge batteries. Avoid spilling, and burning of yourself or clothing. Compatible with any standard acid pack tube, with a simple thumb release valve control for acid flow. Featuring a cell-eye to indicate when the battery is full. Can also be used in vehicles and batteries with big openings without rubber adaptor.

Fast and safe way to fill dry charge batteries
Prevents spilling acid and burning yourself
Compatible with any standard acid pack tube
Cell-eye indicates when the battery is full

We all know how hard it is to get those “straight” chucks onto our motorcycle tyres. This chuck will fit most air hoses. If it doesn't screw directly onto the hose you are using, you will have to buy an adapter available at most plumbing supplies.

The Whites Oil Filter Wrench is the ideal tool for removing and installing spin-on oil filters with a 76mm diameter. The tool enables you to quickly and simply remove and install spin-on filters. Constructed with a 24mm external hex head and 1/2" square socket drive for use with a spanner, ratchet or torque wrench for accurate installation and manufactured from lightweight 6061 aluminium.

For installation and removal of spin-on oil filters
24mm external hex head and 1/2" square socket drive
6061 aluminium construction
76mm diameter

The Whites Top Dead Centre Tool allows you to find top dead centre fast and easily, simply rotate the engine and the piston will rise up the centre indicator. The perfect tool for engine rebuilds and when you are needing to find top dead centre. The tool can fit any 14mm spark plug hole and is constructed from 304 stainless steel for corrosion resistance and durability.

Stainless steel construction
Fits any 14mm spark plug hole
Find top dead centre quick and easy

The ideal tool when setting valves with shim type adjustment. The Whites Valve Shim Tool compresses the valve shim bucket for easy removal of the valve adjustment shim, allowing you to adjust the valve clearance on your ride. Hardened alloy steel construction for exceptional strength and durability.

For adjusting valve clearance on twim-cam models
Holds valve spring bucket down so adjusting shims can be removed
Constructed of hardened alloy steel

Whites Combo Tyre Levers are the perfect addition to your trackside toolbox, enabling quick & easy tyre changing. A 32mm spanner end is used to loosen the axle nut for removal of the wheel while the spoon-type tyre lever end allows quick & easy tyre changing.

• Tyre spoon end makes for easy tyre changing
• 32mm spanner end for quick & easy axle removal
• 240mm forged alloy lever
• Lightweight for easy toolbox transportation

Brand new aftermarket Stator + Red Machined Aluminum Mosfet Regulator Kit

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator

• Highest-grade lamination materials
• Highest-grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included

Machined Aluminum Mosfet Regulator

Our new red machined aluminum Mosfet voltage regulator is a great upgrade for heat dissipation in any power sports charging system. After 10 minutes of use, our billet aluminum heatsink runs cooler by 33% than standard cast regulator housings. Our new red regulator, equipped with the renowned Mosfet regulation technology, is an added value to any three-phase permanent magnet charging system.

STOP BURNING YOUR REGULATOR RECTIFIER!
It is time to update or replace your voltage regulator with the advanced MOSFET type.
It runs cooler than all OEM diode-style regulators. In addition, this rectifier has to overheat protection, rather than burn up, it will simply turn off for a while and cool off.

• The quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher-grade electric components

We have even included the opposite connector (main harness side) as we know these are often melted/ corroded/ defective and a major cause of repetitive electrical issues.

Why use Mosfet Enhanced technology?

• Runs cooler: Runs much cooler than the traditional Shunt voltage regulator rectifier.
• Saves gas: Less load on the stator, less work, less fuel is used and you save.
• Regulated energy: The power charging your battery is steadier and smooth
• Extended battery life: Extends the battery’s life and cold-cranking capacity
• More engine power: Removes stator load resulting in more engine power
• Optimized power: Optimize power delivery by switching the stator coils on or off.

Specifications:

• Dimensions Stator:
• Interior diameter: 42 mm
• Exterior diameter: 105 mm
• Thickness: 20 mm
• Length of wires stator to grommet: 160 mm
• Length of wires grommet to plug: 950 mm
• Length of pickup coil's wire to grommet: 90 mm
• Other specifications:
• Number of wires: 5
• Number of plugs: 3
• Number of pins: 5
• Wire-to-wire resistance:
• Alternator: White between each White = 0.6 ohms +-20%
• Pickup: Green to Blue = 500 ohms +-20%
• Dimensions Red Machined Aluminum Mosfet Regulator (CNC):
• Width: 103 mm
• Length: 103 mm
• Height: 28 mm
• Fixation holes center to center: 80 mm
• Other specifications:
• Number of plugs: 2
• Number of pins: 5
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: 15 V
• Operation Temperature: -20°C to 85°C

The Torque Mighty 15 Folding Multi-Tool includes 15 chrome vanadium tools. It has laser-etched graphics and lightweight 6061 aluminium sides.

Key Features:

• 2, 2.5, 3, 4, 5, 6, 8mm Hex keys.
  
  
• T25 Torx key.
  
  
• No.2 Cross head screwdriver.
  
  
• No.5 Flat head screwdriver.
  
  
• Chain tool.
  
  
• 14G, 15G, 16G, Mavic M7 spoke keys.

The Whites Crankcase Separator Tool fits most 2 and 4-stroke engines with vertically split cases. It allows a multitude of bolt patterns to be used and eliminates binding under heavy loads. The kit includes both 6mm and 8mm mounting bolts and the crankcase separator centre bolt with a 24mm hex head for use with torque wrenches and socket sets. The Whites Crankcase Separator Tool is perfect for splitting cases with ease while preventing unnecessary damage.

Slides in fingers allow multiple patterns for almost all models
Includes both 6mm and 8mm mounting bolts
Both 6mm and 8mm bolts are 200mm long
24mm hex head centre bolt

The Whites Belt Tension Gauge can be used to adjust belt tension on most motorcycles equipped with a secondary drive belt, the gauge provides a simple way to confirm the belt for proper tension. Correctly tensioned and aligned belts prevent premature wear on the whole of the drive chain. Ideal for use after a belt replacement or wheel servicing, constructed with a 1" to 3.5" scale for quick and easy measurement.

Easy to use and read
The gauge allows for accurate belt tension to be set
Use after belt replacement/adjustment or wheel service
Use on secondary drive belts with 10 pounds specification
1" to 3.5" scale

Directions For Use:
1. Position the small O-ring over the 10 lb. mark.
2. Position the U-shaped belt cradle against the bottom of the belt at a 90-degree angle and locate the large O-ring to a reference point, record reading.
3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, the difference in the reading is the belt deflection (refer to service manual for specification).

The Whites Jet Wrench is a two piece tool set with 3 different applications, a double-sided 6mm and 8mm wrench for round jets is included along with a 6mm wrench for hex jets. The double-sided wrench is constructed with a knurled centre for additional grip during operation with the 6mm hex wrench including a rubber cap. Perfect for 6mm hex jets and carburetors with round jets.

Double end wrench suitable for use with 6mm and 8mm round jets
Single end wrench for use on 6mm hex jets
Knurled centre for additional grip
Hex wrench has a rubber cap for additional grip

A great auxiliary tool for tyre irons when replacing off-road tyres and a must when installing tubes. Provides an easy way to push the tyre bead down into the drop centre of the rim on off-road wheels while using tyre irons to change the tyre. Slip the slot of the tool over the spoke and push bead down on opposite side of the tyre from your tyre irons. It will facilitate pulling the tyre over the edge of the rim allowing for easier and faster tyre removal and installation. No more fighting to keep the bead down while installing off-road tyres.

Constructed from 304 stainless steel
Pushes bead down allowing for quick and easy tyre installation
Groove hooks onto spoke to prevent tool popping out
Specifically designed for supermoto 17" rims and tyres

The Whites Plug Wrench is a must-have tool for 4-cylinder Hondas with deep recessed spark plugs. This plug wrench allows you to reach down to those difficult spark plugs, compatible with most Hondas that use D7EA, D8EA and D9EA spark plugs. Constructed with a T-handle for easy operation and a 12mm threading and 18mm hex end.

Must-have tool for 4-cylinder Hondas with deep recessed spark plugs
Fits most Hondas using D7EA, D8EA and D9EA spark plugs
Constructed with a T-handle for easy operation
This fits spark plugs with 12mm threading and 18mm hex size

The Whites Tyre and A/C Valve Core Tool is a dual valve stem core removing/installation tool. Constructed with a big mouth on one end and a small mouth on the other while the knurled centre ensures an exceptional grip when in use. The tool is used to remove and install both tyre valve stem cores and A/C valve cores. Manufactured from chrome plated steel providing strength, durability and corrosion resistance.

Installs and removes A/C and tyre valve cores
Knurled centre for additional grip
Steel construction provides strength and durability
Corrosion resistant chrome plating

Crafted with a robust steel case and ring, featuring an acrylic window for clear visibility, the Whites Analogue Tyre Pressure Gauge ensures accurate readings with ease. The flexible hose allows makes it an essential and versatile tool. The integrated pressure-bleeding button also allows for convenient adjustment, making it an essential companion for every vehicle owner.

Features:

• 2" Dial gauge with protective casing
• Steel case and ring, acrylic window
• Pressure-bleeding button
• Flexible "No Leak" hose
• Accuracy: ±2 psi F.S.
• Pressure range: 0-100psi and 0-7.0kg/cm2
• Pressure unit: psi, bar, kpa
• Product size: 26.2 x 5.6 x 2.6 cm
• Net weight:113g
• Gross weight:144g

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 45/50mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

The Whites Fork Damper Rod Holder is the ideal tool to hold damper rod when disassbling and assembling the front forks. It provides a secure method of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Compatible with damper rods sized 15-25mm and constructed with a 1/2" square socket drive for use with a ratchet, bar or torque wrench.

Holds damper rod when assembling/disassembling forks
Compatible with rods sized 15-25mm
1/2" square socket drive for use with bar or torque wrench

The Whites Cylinder Head Holders are a pair of sturdy stands that suspend your cylinder heads above the workbench safely and securely while cracks are repaired, seats are ground, carbon removed, and guides knurled and reamed. The stands provide ample clearance under heads for knurling and reaming valve guides. Constructed from zinc-plated steel for strength and durability while also providing corrosion resistance.

Suspends cylinder heads above your workbench
Provide ample clearance for knurling and reaming valve guides
Zinc plated for corrosion resistance
Steel construction provides strength and durability

The Whies Fork Cap Socket is used for removal and installation of the fork cap nut (1-3/8" hex) on most big twin and sportster models. Constructed with an o-ring insert design that allows you to remove/install the fork cap without the risk of damaging the fork cap. An inbuilt 1/2" square socket drive enables the use of a torque wrench for tightening to the manufacturers recommended specification, eliminating the risk of under or over tightening and stripping the thread.

For 1-3/8" fork caps commonly found on big twins and sportsters
O-ring insert prevents damaging the fork cap
1/2" socket drive for accurate torquing during installation

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat-treated for strength and durability
Durable hot black oxide finish

Thread Size: M26 x 1.0
Thread Direction: Right Hand
Type: Male (External Thread)

Make your maintenance and repair jobs quicker and easier with the Whites T-Handle Sockets. Perfect for those quick and easy to access nuts and bolts. No more slow operation with conventional spanners or having to constantly swap sockets, you'll never want to return to those old spanners. The perfect tool to have in the workshop, garage or at the track.

Constructed from high-quality chrome vanadium steel
Faster and easier than spanners
Great in the workshop, garage or at the track
Size: 12mm