Tools

The Whites Bearing Retainer Tool is designed to remove and install the rear wheel seal/bearing retainer ring while preventing damage to the retainer ring. The 4 pin design ensures a firm grip of the retainer ring, 42mm diameter for 42mm retainer rings. Constructed with a 22mm external hex head and 3/8" square socket drive for use with sockets, spanners and torque wrenches. Manufactured from hardened steel for strength and durability.

42mm diameter 4 pin design
22mm external hex head
3/8" square socket drive
Durable steel construction
Prevents damaging the retainer ring

The Whites Clutch Nut Wrench is a dual-ended clutch nut wrench designed to remove and install the clutch nut with ease. Designed with a 34mm and 41mm end for diverse application. Constructed with a 3/8" square drive and 19mm hex in the centre for use with a torque wrench or spanner for additional leverage and accurate installation. Manufactured from steel for exceptional strength and durability.

41mm and 34mm ends
3/8" square socket drive in the centre
19mm hex in the centre for spanner use
Steel construction for strength and durability

Perfect for ensuring accurate tyre pressure anytime, anywhere, White's Digital Tyre Pressure Gauge has a back-lit LCD gauge with a light on the head for effortless use in low-light conditions. Enjoy precision with ±1 psi F.S. accuracy and the added benefit of auto shut-off for extended battery life.

Specifications:

• Pressure range: 0-150 psi, 0-10.3 bar, 0-1034 kPa, 0-10.5 kgf/cm²
• Pressure units: psi, bar, kPa, kgf/cm²
• Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kgf/cm²
• Back-lit LCD and light on gauge's head for easy use in dark conditions.
• Auto shut off for extended battery life.
• Accuracy: ±1 psi F.S.
• Product size: 13.8 x 5.6 x 2.5 cm
• Net weight: 55g, Gross weight: 77g

The Oxford Airflow Shock is a portable shock pump for topping up air pressure on MTB suspension forks and rear shocks, quickly delivering up to 300 psi capacity.

Features:

• Mechanical pressure gauge
• 6 Inch pivoting hose
• Precision alloy barrel
• Pressure release button
• Max inflation: 300 PSI

A 28-piece motorcycle tool kit. Ergonomically designed, the tools come with soft gel handles that are comfortable to use. The tools are made from high- quality carbon steel and come in a compact storage case. The case can be kept under your rear seat, it folds down to 18cm x 10.5cm x 4cm.

Features:

• 28-piece kit.
• Ergonomically designed.
• High-quality carbon steel construction.
• Compact storage case.

Includes:

• 10pc screwdriver bit set
• Extension bar
• 5pc hex key set (6mm, 5mm, 4mm, 3mm, 2mm)
• Wire cutters
• Screwdriver handle
• Needle nose pliers
• 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 11mm sockets
• 2 x electrical screwdrivers

9 Hex Key set.

Key Features
• 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm Hex keys
• Ball end

The Whites Tyre Valve Stem Repair Tool removes and installs the valve core of your tyre. If your tyre is leaking, check the valve before replacing the tyre, use the Whites Tyre Valve Repair Tool to extract the damaged core and install the new stem in tubeless tyres. It can also rethread the inner and outer part of the stem, making this the ultimate valve stem repair tool.

Removes and installs valve core
Can also rethread inner and outer stem

The Whites ATV Pinion Bearing Nut Tool is a necessary item for removing the pinion gear bearing lock nut on the rear differential of the Kawasaki KVF series. Manufactured from cold rolled carbon steel for exceptional strength and durability. Constructed with a knurled finish for a better grip when operating by hand and a 1/2" square socket drive for use with a ratchet or torque wrench for accurate installation.

Removes/installs pinion bearing nut
Compatible with Kawasaki KVF series
1/2" square socket drive for use with torque wrenches
Cold rolled carbon steel construction
Knurled finish for better grip

Introducing our newest heavy-duty recall-type charging system upgrade kit for Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4.

Anyone who rides or repairs Aprilia’s motorcycles is probably familiar with the stator, flywheel, and sometimes voltage regulator issues common to these models. Most of these bikes will have had at least one stator fail in its lifetime so far. The main problem was extremely strong magnets were used on the original flywheels, creating a very high power stator output, which generated excessive heat. This usually resulted in burned-up, or shorted stator winding, and often in a failed voltage regulator.

The solution was a new flywheel from Kokusan with lower-strength magnets, dropping the stator output and heat generation. This results in a charging system output perfectly matched for the bike’s electronic needs and the long-term reliability of the stator and voltage regulator.

To prevent or correct the flywheel problems, our engineers at RMS Labs have come up with a completely reliable heavy-duty charging system replacement kit for your Aprilia. Upgrade today if you haven’t already!

Included in this kit

• Heavy-duty Kokusan brand recall-type OEM flywheel
• Triple-tested heavy-duty stator
• Mosfet voltage regulator rectifier
• Crankcase cover gasket
• Flywheel puller

With this kit, you will be able to upgrade your current failure-prone charging system with a heavy-duty version using the latest technologies

Features

• Kokusan upgrade/recall type flywheel: Lower-strength magnets for correct stator output, low heat generation, and long-term reliability.
• Built to OEM size: Fits precisely in your ride install it and forget it.
• Improved epoxy: Uses high-temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment
• High-grade steel capping: Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
• Precise balancing: Eliminates crankshaft vibrations for longer engine longevity.
• Shop with confidence: All products are tested. Don't waste time with temporary solutions, and start fixing your ride like a pro!

Specifications:

• Stator Dimensions
• Interior diameter: 43 mm
• Exterior diameter: 105 mm
• Thickness: 13.8 mm
• Length of wires stator to grommet: 125 mm
• Length of wires grommet to plug: 320 mm
• Other specifications:
• Number of wires: 3
• Number of plugs: 1
• Number of pins: 3
• Alternator:Yellow to Yellow = 0.3 ohms +-20%
• Flywheel Dimensions
• Exterior Diameter #1: 121 mm
• Exterior Diameter #2: 119 mm
• Interior Diameter: 107 mm
• Interior Diameter Center Housing: 19.2 mm
• Exterior Diameter Center Housing: 34 mm
• Thickness (exterior): 35.3 mm
• Thickness (interior): 30.65 mm
• Voltage Regulator Dimensions
• Width: 80 mm
• Length: 110 mm
• Height: 28 mm
• Wires length: 150 & 400 mm
• Fixation holes center to center: 80 mm
• Other specifications:
• Number of plugs: 2
• Number of pins: 7
• Number of wires: 7
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: 15 V
• Operation Temperature: -20° C to 85° C
• Flywheel Puller Dimensions
• 36 mm x 1.5 right-hand male
• Length: 60 mm
• Exterior Diameter: 47 mm
• Interior Diameter: 20 mm
• Exterior Diameter Center Housing: 37 mm

Please note: There are two possible kits for the RSV4 engine. This kit ONLY fits RSV4 engine numbers HIGHER than 3413 with Kokusan flywheels. Please compare our flywheel to your original.

If your RSV4 engine number is LOWER than 3413, your motor uses the Mitsubishi flywheel and will need Stator Assembly 857201. Refer to kit RMS900104929.

Tackle maintenance and repairs with confidence using this versatile motorcycle tool kit. Designed for BMW riders, it includes high-quality combination and ratcheting wrenches, hex and Torx keys, socket extensions, adaptors, and essential tools like locking pliers and a 6-in-1 screwdriver.

Kit includes:

• Combination Wrench – 8mm
• Combination Wrench – 10mm
• Combination Wrench – 12mm
• Ratcheting Combination Wrench – 13mm
• Crescent Wrench – 8" (up to 26mm)
• Hex Wrenches – 3mm, 4mm, 5mm, 6mm, 8mm
• Torx Wrenches – T20, T25, T30, T40, T45, T50
• Rear Axle Wrench – 34mm
• Locking Pliers
• 6-in-1

Features:

• 2 Steel case and fascia ring.
• Tough acrylic window.
• Holds the peak pressure reading.
• Pressure bleeding button.
• Long 14/36cm flexible hose with a 360° swivelling angled head.
• Gauge unit protected in a rubber casing.
• 0 -60psi for motorcycles, cars, caravans, etc.

The Whites Compression Bolt Removal Tool is the ideal tool for removing and installing the compression valve assembly from the fork cap. A 17mm hex head enables you to properly torque the compression valve assembly to the manufacturers specification during installation. Constructed using lightweight and durable 6061-T6 aluminium.

17mm hex head
6061-T6 aluminium construction
Enables you to remove and install the compression valve assembly
Hex head enables you to torque the assembly to specification

The Whites Nitrogen Needle Kit is used to fill shocks with self-sealing type rubber valve.

Ensures the correct and necessary tension of the timing chain. Prevents the chain from rattling and jumping cam timing.

High-quality safety wire plier. Small type.

The Whites Tyre Lever is the ideal tool for tyre changes. This tool makes for easy tyre/tube changes and repair. The design allows it to be stored in a bumbag or hydration pack for those emergency situations, stainless steel construction for exceptional strength, durability and corrosion resistance. An incorporated handle enables easy operation when changing tyres.

Fit in your bumbag or hydration pack
Stainless steel construction for strength
Handle for easy operation

The Whites Carburator Nozzle Cleaning Tool Set is a folding set of 20 precise sized steel tips designed for cleaning the nozzles of carburetor jets. The stainless steel tips range from 0.45-1.50mm in 0.05mm increments, ensuring you have the perfect tip for the nozzle. The aluminium body and polypropylene construction provide durability and corrosion resistance, with a folding design for easy workshop storage.

20 precisely machined stainless steel tips
Sizes range from 0.45-1.50mm in 0.05mm increments
Aluminium body with polypropylene housings
Manufactured from corrosion resistant materials

The Whites Shock Compression Adjuster Removal Tool is for disassembling the shock absorber compression stage adjuster on KYB/Showa (24mm) shocks. It can also be used to disassemble the piston rod on WP shock absorbers (counter nut on the foot).

Having difficulty accessing your tyre valves? We’ve made it easy for you with our 90 degree clip-on valve extension. To make it even easier, we suggest attaching the chuck to your pump hose before attaching it to the tyre.

Compact design folds down when not required; perfect for garage use!

• Flexible material ideal for narrow spaces
• Pouring spout for clean disposal

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATVs, making Whites products your one-stop flywheel shop. Constructed from heat-treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

• Used for removal of the flywheel or rotor if applicable
• Premium quality high carbon steel
• Heat-treated for strength and durability
• Durable hot black oxide finish
• Thread Size: M30 x 1.5
• Thread Direction: Right Hand
• Type: Female (Internal Thread)

Designed for removing the fork cap on your forks, making fork oil changes a breeze. Constructed from durable steel the Whites Fork Cap Wrench is long lasting and is the essential tool when performing fork maintenance.

Wrench for removing front fork cap
Made of durable steel
Closed end for easy operation
Size: 48mm

Refer to the fitment information for the perfect fork cap wrench for your ride.

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M18 x 1.5
Thread Direction: Right Hand
Type: Male (External Thread)

The Whites Chain Alignment Tool is designed to simplify alignment of the countershaft and rear sprockets during chain adjustment or wheel installation. The tool simply clamps to the rear sprocket with the alignment rod pointing toward the front sprocket, the rod will indicate the sprockets alignment and the rear wheel can be adjusted until both sprockets align. Compatible with motorbikes and ATVs with a 420-630 chain.

Indicates sprocket alignment
Simply clamps to rear sprocket with indicator rod pointing forward
Prevents excessive sprocket and chain wear
Compatible with chain sizes 420-630
Lightweight anodised aluminium body
Nylon bolt prevents damage to the rear sprocket

The Whites Small Multivalve Tool is designed to significantly reduce time when replacing valves in modern 16-20 valve head engines. Compatible with both 4 and 5 valve per cylinder heads that have a 5mm valve stem diameter or smaller. This tool replaces the large clamp-type valve spring compressor.

Suitable for use in modern 16-20 valve heads
Compatible with 4 and 5 valves per cylinder heads
Only for use with 5mm valve stems or smaller
Significantly reduces time when replacing valves

Used in many different jobs the flywheel puller is an essential engine service tool. Whites have a huge selection of flywheel pullers for most motorcycles and ATV's, making Whites products your one-stop flywheel shop. Constructed from heat treated carbon steel for extreme strength and durability your flywheel puller will last for all those engine jobs to come.

Used for removal of the flywheel or rotor if applicable
Premium quality high carbon steel
Heat treated for strength and durability
Durable hot black oxide finish

Thread Size: M26 x 1.0
Thread Direction: Right Hand
Type: Female (Internal Thread)

The Whites Cartridge Rod Holding Plate is perfect for disassembly and assembly of KYB/Showa twin-chamber and most street cartridge forks. The tool is designed to hold back the fork spring allowing you to loosen and tighten the bottom nut or fork cap on 10mm to 12.5mm cartridge rods, simplifying fork maintenance and servicing.

Holds back fork spring
Use when removing/installing the bottom nut or fork cap
Compatible with 10mm to 12.5mm cartridge forks
Simplifies fork maintenance and servicing
Suitable for KYB/Showa twin-chamber and most street cartridge forks

The Whites Carburator Adjustment tool is a 11" long tool with a 8mm hex nut/flathead screwdriver adjusting bolt. This combo design allows unlocking of the locknut, adjusting of the balancing screw and re-locking of the locknut in one simple step, requiring only one convenient tool. Designed to sync carburetors on Honda, Kawasaki, Yamaha and Suzuki multi-cylinder bikes and compatible with both Mikuni and Keihin carburetors.

One combo tool for syncing carbs on multi-cylinder bikes
Compatible with both Keihin and Mikuni carburetors
11" length allows access to hard to reach spots
Alloy steel construction
8mm hex/flathead screwdriver tip

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating for corrosion resistance making a strong and durable fork driver. A knurled grip limits the risk of slipping when hands are oily. Evenly drives your fork seals and prevents damage to your forks compared to other methods.

Perfectly weighted for efficient seal driving
Splits for easy installation and use
Plated carbon steel body
Use with both conventional and inverted forks
The essential tool for installing fork seals
Size: 37mm

Available in sizes 32mm-54mm.