New Arrivals

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Connector included

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Carburetor repair kits

• Kits include all of the necessary components to repair a carburetor. ATV models with two carburetors include components to repair two carburetors.
• Kit includes necessary all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat. (Needle jet and other pressed in jets are not included in kit.)
• OEM jet sizes are included in the kit. NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
• Applications that use paper float bowl gaskets are upgraded to High Performance Interface Gasket material.
• Components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non US model.
• Off road use only.

Crafted from military-spec certified TI3Al titanium alloy, Vertex Titanium Valves are made to endure the harshest racing conditions. Forged from a single blank, grain flow is improved to enhance the mechanical characteristics of the valve without having to resort to welding. Special PVD, CVD, and CrN coatings are used to provide low-friction surfaces that reduce heat generation and resist carbon build-up; coatings allow alloys like titanium to become ultra-smooth while reaching hardness levels 5x that of high-speed steel.

• Military-spec certified TI3Al titanium alloy
• Forged from a single blank
• PVD, CVD, and CrN coatings
• Reduces heat generation
• Resists carbon build-up
• Significantly stronger than steel

Manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Made of high-quality vulcanized rubber.
• Fits as well as OEM.
• Three to four times the life than OEM.

A quality caliper rebuild kit from All Balls. Contains everything needed to rebuild your caliper to like new condition.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Manufactured to OEM specifications and tolerances to guarantee quality and superior durability. Dust seals feature external garter springs to keep the fork tubes clean from dust and grime.

Features:

• Made of high-quality vulcanized rubber.
• Fits as well as OEM.
• Three to four times the life than OEM.

Putoline Oil is a Dutch manufacturer and supplier of high-quality oils and lubricants developed specifically for motorcycles, scooters and quads, making Putoline unique. Almost 50 years of experience and continual research allows Putoline to provide cutting edge products. Manufacturing their own products guarantees consistently high-quality motorcycle oils. Putoline Oil, Driven by Technology!

Putoline air filters, based on leading-edge open-cell foam technology, bring users major benefits, including:

• Improved performance through increased airflow
• Improved protection through finer filtration levels
• Substantial cost savings through serviceability and re-use

Fully reticulated (open cell) foam, as used in all Putoline filter products, consists of a honeycomb of tiny, interlocking cells of uniform size.  When treated with specially formulated filter oil, each passageway is like hundreds of very small centrifugal/oil bath filters connected one to another.  In this way, the foam traps and holds the particles throughout the entire volume of foam.

The development of this unique foam represents a major advancement in air filtration technology. As a result, foam air filters, when compared with paper or cotton gauze equivalents, combine great airflow capability, huge dust holding capacity, and very high filtration efficiency for even extremely small particles.

Construction:

1. Coarse open-pore foam catches airborne dirt, grime and sand.
2. Fine open-pore inner foam acts as a second filter to trap the smallest particles while ensuring maximum air passage.
3. Exclusively formulated adhesive ensures glue seams will not break down.
4. Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox, while acting as a breathable gasket for increased air passage.
5. Fused outer and inner elements prevent dirt and grime from being lodged between layers. Trapped particles can restrict airflow. If dirt works it's way into your engine, a pinhead-sized granule will gouge your piston and rings like a bullet. 

Quality pair of fork oil seals from All Balls Racing.

Features:

• Dyno tested to last 3 to 4 times longer than OEM seals.
• Directional ribs on outside of seal allow seal to be installed easily.
• Dual-sealing lips guarantee oil stays in and dirt stays out.

NOTE: This Vertex Top End Gasket Set contains all components pictured.

Produced in the U.S.A. with the latest materials and technology in gasket production to Vertex specifications. Vertex gaskets ensure long-lasting performance and leak prevention for your rebuild needs. Vertex's replacement gaskets and seals are available as top-end kits, complete engine kits, or as an oil seal kit.

• These sets include the head, base, and exhaust gaskets, valve seals, O-rings and other gaskets to complete a top-end rebuild.

Philips CityVision Moto headlights are specifically designed to increase rider's security in city environment. The attention-grabbing orange effect as well as the light output increase by 40% allow a safer riding experience in traffic and actively participate in accident reduction.

For maximum safety and visibility, CityVision Moto produces a distinctive, attention- grabbing orange effect.

Features:

• Distinctive orange effect.
• Maximum safety.
• Specifically designed for city use.
• Up to 40% more vision.
• 3250 K bright orange light.

Brake lever lock with Zinc alloy protected alarm module (with alarm light). The Kovix KHL series lock is an alarmed front brake lever lock. Manufactured from zinc and stainless steel, it features a double locking system and a 120dB alarm.

A big advantage of being located on the handlebars is its visibility.

Features:

• Material: Zinc Alloy
• 10mm locking pin.
• 120dB siren.
• Alarm with automatic function.
• Long battery life.
• Waterproof electronics.
• Weighs 443gm

PV SERIES – Semi-Sintered Pads

New high durability semi-sintered pads that have the brake response of an organic but the durability of a sintered pad. For sport bike use only.

Brand new aftermarket Voltage Regulator Rectifier

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• No assembly required
• Higher grade of electric components
• The quality exceeds the OEM equipment
• All products shipped are tested

All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

Specifications:

Dimensions:

• Width: 80 mm
• Length: 110 mm
• Height: 29 mm
• Wires length: 125 mm
• Distance between fixation holes center to center: 80 mm

Other specifications:

• Number of plugs: 2
• Number of pins: 7
• Number of wires: 7
• Minimum Charging Voltage: 14.5 V +- 0.5 V
• Maximum Charging Current: 50 A / 500 W
• Open Circuit Voltage: < 15 V
• Operation Temperature: -20°C to 85°C

Note: Battery condition is important. No regulator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong moulded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Features:

• Designed to increase horsepower and acceleration.
• Hundreds of sizes and shapes for most applications.
• High airflow with excellent filtration.
• Clamp-on washable and reusable air filter.
• Malleable flanges.

Specifications:

• Filter Material: Cotton Gauze
• Base Outside Diameter: 146mm
• Top Outside Diameter: 127mm
• Height: 178mm
• Flange Inside Diameter: 89mm
• Flange Length: 44mm
• Flange Type: Angled

Each pack of Premier CSK Clutch Springs contains a complete set of heavy-duty springs. Up to 15% stronger than the original.

Customer should be advised that after installation of a CSK kit the clutch lever will feel slightly ‘heavier’ than standard

ROAM THE UNKNOWN

Hit the trails and have fun with your friends with this rugged powersport sat-nav. It has all the mapping you need to stay on track and communication technology to stay in touch while you’re out there.

Features

• Keep your crew together with group tracking for up to 20 riders.
• Navigate unpaved roads and trails by using turn-by-turn trail navigation with OpenStreetMap (OSM).
• This rugged sat-nav is IP67 weather-resistant and has a glove-friendly 8″ touchscreen display.
• See vivid aerial views of terrain with downloadable, subscription-free BirdsEye Satellite Imagery.
• Peace of mind comes built-in. With an active subscription, you can use inReach® technology for global satellite communication.

Specs

• DIMENSION: 8.1"W x 6.7"H x 1.2"D (20.7 x 16.9 x 3.1 cm)
• DISPLAY SIZE: 6.8"W x 4.2"H (17.2 cm x 10.8 mm); 8" diagonal (20.3 cm)
• DISPLAY RESOLUTION: 1,280 x 800 pixels
• DISPLAY TYPE: Multi-touch, glass, high brightness HD colour TFT with white backlight
• DUAL-ORIENTATION DISPLAY: Yes
• WEIGHT: 22.8 oz (246 g)
• BATTERY TYPE: Rechargeable lithium-ion
• BATTERY LIFE: Up to 6 hours at 50% backlight, Up to 1 hour at 100% backlight
• WATERPROOF: IPX7
• DROP RATING: MIL-STD-810
• DUST RATING: IP6X
• MAGNETIC MOUNT: locking magnet-assisted mount
• TUBE MOUNT (1.5" - 2.375"): Yes
• 1.5" BALL ADAPTER WITH AMPS PLATE: Yes
• PRELOADED STREET MAPS: Yes
• DATA CARDS: microSD™ card (not included)
• 3D TERRAIN: Yes
• INTERNAL STORAGE: 32 GB
• ABILITY TO ADD MAPS: Yes
• EXTERNAL MEMORY STORAGE: Yes (256 GB max microSD™ card)
• INCLUDES MAP UPDATES: Yes
• DOWNLOADABLE SATELLITE IMAGERY: Yes (BirdsEye)
• GPS: Yes
• GALILEO: Yes
• 10 HZ MULTI-GNSS POSITIONING: Yes
• BAROMETRIC ALTIMETER: Yes
• COMPASS: Yes
• POINT-TO-POINT NAVIGATION: Yes
• PRELOADED TOPOGRAPHICAL MAPS: Yes
• PRELOADED US PUBLIC LAND BOUNDARIES: Yes
• PRELOADED PRIVATE LAND PARCEL MAPS: Yes(parcels greater than 4 acres)
• PRELOADED USFS ROADS AND TRAILS, INCLUDING MOTOR-VEHICLE-USE-MAPS FOR MOTORCYCLE, ATV, SXS AND FULL-SIZE 4X4: Yes
• NAVIGATE-A-TRACK NAVIGATION: Yes
• TURN-BY-TURN TRAIL NAVIGATION: Yes
• GARMIN REAL DIRECTIONS™ LANDMARK GUIDANCE: Yes
• ROUTE SHAPING THROUGH PREFERRED CITIES/STREETS: Yes
• INCLUDES TRAFFIC: Yes (with Garmin Tread app)
• LANE ASSIST WITH JUNCTION VIEW (DISPLAYS JUNCTION SIGNS): Yes
• SPEED LIMIT INDICATOR (DISPLAYS SPEED LIMIT FOR MOST MAJOR ROADS IN NEW ZEALAND AND AUSTRALIA): Yes
• DRIVER ALERTS FOR SHARP CURVES, SCHOOL ZONES, RED LIGHT AND SPEED CAMERA WARNINGS AND MORE: Yes
• SMART NOTIFICATIONS VIA APP: Yes
• ACCESS TO LIVE SERVICES VIA APP (TRAFFIC, WEATHER, ETC.): Yes
• GLOVE-FRIENDLY TOUCHSCREEN: Yes
• CONTROL MUSIC AND MEDIA FROM SMARTPHONE OR MP3 PLAYER: Yes
• SUNLIGHT READABLE AND WEATHER RESISTANT: Yes
• MOTORCYCLE OR POWERSPORTS SPECIFIC POINTS OF INTEREST FOR CYCLE REPAIR SERVICES, DEALERS AND MORE: Yes
• ROUND TRIP ROUTING: Yes
• SPECIALIZED ROUTING FOR THE SIZE AND WEIGHT OF YOUR VEHICLE: Yes
• PAIR WITH GARMIN POWERSWITCH™ DIGITAL SWITCH BOX: Yes
• BIRDSEYE SATELLITE IMAGERY (DOWNLOAD VIA WI-FI): Yes
• RADIO FREQUENCY BAND:MURS (151-154 MHz)
• GROUP RIDE RANGE: Up to 8 miles (13 kilometres) with the antenna mount kit
• GROUP RIDE TRACKING: Up to 20 riders simultaneously
• GROUP RIDE UPDATE RATE: 2.5 sec
• RADIO TRANSMITTED CANNED MESSAGES: Yes
• DOG TRACKING: Yes (when paired to compatible dog track system)

Note: TWO-WAY GLOBAL MESSAGING, INTERACTIVE SOS ALERTS, LOCATION SHARING requred subscription; for more information visit:

ht tps://discover.garmin.com/en-AU/inreach/personal/#subscriptions

RMSTATOR is specialized in designing and manufacturing innovative electrical and electronic components for Powersports vehicles like motorcycles, ATV, SxS, UTV, snowmobiles, and PWC. Through unrelenting quality control, we ensure that each component meets or exceeds the OEM specs. With over 25 product families, rest assured that you will find the part you need.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connectors included
• Rubber grommet included
• Back Plate included
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause of repetitive electrical issues.

Dimensions:

• Interior diameter: 42mm
• Exterior diameter: 105mm
• Thickness: 13mm
• Length of wires stator to grommet: 85mm
• Length of wires grommet to plug: 535mm

Other specifications:

• Number of wires: 3
• Number of plugs: 1
• Number of pins: 3
• Number of poles: 15

Wire to wire resistance:

• Alternator: Black to Black = 0.4 ohms +-20%

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Oxford's Exhaust Heat Shield offers thermal protection by deflecting radiated exhaust heat and guards against you, your clothing or your accessories from accidently touching a hot exhaust system.

The Heat Shield is supplied with adjustable clamps so it can be fitted to a variety of different sized exhaust pipe diameters.

Available in four bespoke designs to suit the style of your bike: Cafe, Street, Sport and Scrambler.

Features:

• Guards against items coming into contact with a hot exhaust.
• Helps to protect your bike's exhaust system from damage.
• Bespoke design enhances the look of your bike.
• Corrosion-resistant stainless steel construction.
• Easy to install: 2 x clamps included.

Includes:

• 45-60cm clamp(s)
• Anti-vibration washers
• M6 screws
• Flat washers

Please Note:

1. All electrical components must be fitted by a qualified technician.
2. Before fitting electrical components ensure the root cause of the original failure has been addressed.
3. The absence of either of points 1 or 2 above, will void any warranty.

Carry everything on anything!

Let's face it, many modern bikes are just luggage-unfriendly. They have tiny rear seats and/or non-existent rear subframes... nothing to rest against and nowhere to attach anything! Try fitting a pair of panniers to half of the new bikes on sale today - it's a challenge!

But if you need BIG CARRYING CAPACITY, Oxford's AQUA Duffle bags could be the answer.

They are perfect for:

• Sports bikes with tiny rear seats...
• Streetfighters with no rear subframe...
• Scooters with no open frame to secure luggage to...
• Cruisers with little clearance below...
• As well as all the usual adventure touring bikes.

If that's not enough for you, AQUA Duffle bags hug the bike, maximising the stabilising contact points with the bike and, unlike traditional panniers, can't 'sag' in the absence of side panels.

Of course, they still come with Oxford's unique universal fitting system, allowing you to carry up to 50 litres of luggage with complete peace of mind.

Features:

• Tough PVC tarpaulin duffel bag.
• Wipe clean, waterproof construction with welded seams.
• Waterproof roll-top closure.
• Adjustable compression straps for maximum stability.
• Water-resistant zipped external rear pocket.
• Heat-resistant pannier panels.
• Unique attachment system for motorcycles with underseat security strap.
• D-rings allow the bag to be securely attached to the motorcycle.
• Universal fit for almost all motorcycles.
• Width: 60cm, Height: 40cm, Depth: 30cm
• Capacity: 70 litres
• 50-litre capacity bag also available.

All new assembly sold complete with Hot Rods connecting rod.

• The Hot Rods complete crankshaft includes their famed connecting rod; durability at a level OEM rods can only dream of.
• Factory assembled and trued to O.E.M. specifications, Hot Rods cranks will meet or surpass the OEM in performance. Hot Rods makes installing the complete crankshaft simple and easy.
• Crankshaft is completely rebuildable with genuine Hot Rods connecting rods.

Note: Crank bearings and seals sold separately.

All new assembly sold complete with Hot Rods connecting rod.

• The Hot Rods complete crankshaft includes their famed connecting rod; durability at a level OEM rods can only dream of.
• Factory assembled and trued to O.E.M. specifications, Hot Rods cranks will meet or surpass the OEM in performance. Hot Rods makes installing the complete crankshaft simple and easy.
• Crankshaft is completely rebuildable with genuine Hot Rods connecting rods.

Note: Crank bearings and seals sold separately.

Components to repair the rear upper and lower a-arm and knuckle on ATVs with RIS (rear independent suspension).

Features:

• OEM replacement.
• New series of kits now includes hardened and precision ground pins, replacing the OEM-plated mild steel pins.
• Upgraded polyurethane material is designed to be a tighter more precise fit.

Hot Cams Steel Valves are designed as OEM replacements, precision-forged they are strong & durable. Machined head and seat surfaces provide a precise fit. Hot Cams valves are nitride coated and induction hardened valve stem tip provide longevity while a precision polished surface reduces friction resulting in less heat build-up. Hot Cams valves are compatible with all OEM valve keepers and are sold individually allowing you to keep your replacement costs down.

• Forged one-piece OEM replacement valves
• Precision machined valve head and seat surfaces
• Nitride coated
• Induction hardened valve stem tip
• Precision polished surface
• Compatible with OEM valve keepers
• Sold each

Wossner

For more than 35 years, Wössner successfully design and produce high-performance pistons and connecting rods.

In order to offer their customers the best of Wössner Power, their products are produced by using state-of-the-art technology and are subject to continuous quality control.

Performance, quality and longevity - this is what Wössner stands for with high-quality products.

Con Rod Kits

The Wössner 2-stroke connecting rods are always supplied with lifting pins, needle bearings, connecting rod bearings and spacers.
The Wössner 4-stroke connecting rods include crank pins and connecting rod bearings.
Please use our Fitments Tool to ensure the correct part is ordered.

All Balls Fuel Pump Kits are designed to restore lost performance caused by a failing or non-functioning fuel pump. Each kit offers a plug-and-play solution for quick and easy replacement of your OEM fuel pump module.

Kit contents vary by application and may include components such as the pump, filter, hoses, clamps, and wiring harness. Some kits contain only core components like the pump and filter. Please refer to the product image and listing details for exact contents specific to your model.

Features:

• OEM replacement fuel pump kits.
• Plug-and-play installation.
• Contents vary by kit — check image and listing for details.

GOLDfren began manufacturing sintered disc brake pads for a wide range of off-road and road motorcycles in 1991, nearly three decades on from their first motorcycle brake pads GOLDfren has become one of the largest aftermarket manufacturers in the motorcycle brake disc pad industry. Their development of next-generation products has kept them at the technological forefront of Sintered Friction Braking providing you with confidence in the performance, durability and reliability of your brakes.

K5 Series:

The K5 sintered compound is optimal for off-road motorcycles and ATVs. It is recommended for riders who demand great off-road stopping power and brake pad durability when riding on tough off-road terrains. The K5 series is designed for low abrasive interaction with the rotor, long life and self-cleaning capabilities necessary in off-road riding conditions. Friction materials contain metal-ceramic with a sophisticated bronze-graphite and full-metal mixture formulation with fine friction particles to achieve optimal friction properties.

Features:

• High static friction coefficient
• Good abrasive resistance
• Self-cleaning capability
• Low abrasive interaction with the brake rotor material
• Up to 3 times longer operational life compared to organic and Kevlar composite materials

Application:

• Developed specifically for off-road motorcycles & ATVs
• Can be used on both front and rear brakes
• Could be used on the rear brake of road racing motorcycles

Operating Parameters:

• Specific pressure: 2.0 Mpa
• Sliding velocity: 20 m/s
• Constant maximum temp: 500°C
• Short time maximum temp: 750°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufacturers sintered brake pads that contain metal-ceramic and ceramic-carbon friction materials, these materials allow for less brake dust and a quieter braking experience. Sintered brake pads are made by fusing together metallic particles under high temperature and pressure which enhances friction properties and pad life, resulting in longer life and stronger braking. Sintered brake pads experience no brake fade when operating at high temperatures and in wet conditions. They also last up to 5 times longer than organic pads and provide additional braking strength. All materials used are environmentally friendly and do not contain any lead, asbestos, fibreglass or formaldehyde.

Reminder: one set of brake pads services one brake disc, if you are servicing multiple discs you will need multiple sets of brake pads.

Wossner is Germany's finest aftermarket forged piston and rod manufacturer and has over 25 years of experience in the high- performance racing industry. Top European racers and FIM World Champions rely on Wossner for only the best pistons, rods and customer service.

Features

• In-house designed and manufactured; all forgings are produced in Wossner's company-owned forging operation.
• Lightweight pistons with the tightest piston-wall clearances in the industry give you a quieter running engine.
• All pistons include piston, ring, wrist pin and pin locks.
• Wossner pistons are used by leading Supercross, Arenacross and MXGP teams.
• Made in Germany.

Specifications:

• Bo re Size: 47.50
• Piston Size: 47.45
• Ring Quantity Needed: 2